Playing a CD
1.Open the CD Door and load a CD.
2.After loading a CD for play, adjust the CD/AUX/Radio Mode Switch to CD
Mode.
3.Press the Play/Pause Button to play or pause the CD.
4.Press the Stop Button to stop a CD during play.
5.Press the Skip Dn and Skip Up Buttons to skip through tracks on the loaded CD. Press and hold the Skip Dn or Skip Up Buttons to search through an individual track on the CD.
6.Press the Repeat Button once to repeat an individual track (A blinking red dot will appear on the LED Display). Press the Repeat Button twice to repeat the entire CD (A steady red dot will appear on the LED Display).
Programming a CD
1.After loading a CD, press the Program Button. The CD must be stopped before it can be programmed.
“01” will flash on the LED Display to indicate that the unit is in Program Mode.
2.Press the Skip Dn and Skip Up Buttons to select a track from the CD.
3.Press the Program Button to add the selected track to the program.
4.Repeat steps
CD Door
REPEAT
|
| E |
|
| S |
| U | |
/PA |
| |
AY |
|
|
PROGR
AM
S
KIP
DN
SKIP
UP
STOP
PL |
6