A.O. Smith DVE-150, DHE-200 instruction manual Warranty, Tank

Page 18

WARRANTY

A. O. Smith Corporation, the warrantor, extends the following LIMITED WARRANTY to the owner of this water heater:

1.THE TANK

If the glass-lined tank in this water heater shall prove upon examination by the warrantor to have leaked due to natural corrosion from potable water therein, during the first THREE years after initial installation, the warrantor will supply a complete new A. O. Smith water heater of equivalent size and current model. Some government agencies are requiring energy efficient standards for water heaters. In the event regulations prohibit sale of a model of equivalent size and construction, A. O. Smith will provide a model which complies with the regulations of your area, in which case the consumer will be charged the difference in price between the like replacement and the energy efficient model required. The warranty on the replacement water heater will be limited to the unexpired term of the original warranty.

2.ALL OTHER PARTS

If within ONE year after initial installation of this water heater, any part or portion shall prove upon examination by the warrantor to be defective in material or workmanship, the warrantor will repair or replace such part or portion at its option.

3.CONDITIONS and EXCEPTIONS

This warranty shall apply only when the water heater is installed in accordance with local plumbing and building codes, ordinances and regulations, the printed instructions provided with it and good industry practices. In addition, a temperature and pressure relief valve, certified by A.G.A.and approved by the American Society of Mechanical Engineers, must have been installed.

a.This warranty shall apply only when the heater is used:

(1)at temperatures not exceeding the maximum setting of its thermostat;

(2)at water pressure not exceeding the working pressure shown on the water heater;

(3)when filled with potable water, free to circulate at all times;

(4)in a noncorrosive and non-contaminated atmosphere;

(5)in the United States, its territories or possessions, and Canada.

(6)used with factory approved anode(s) installed;

(7)in its original installation location;

(8)sized in accordance with proper sizing techniques for commercial water heaters;

(9)bearing a rating plate which has not been altered, defaced or removed except as required by the warrantor;

(10)not used in a closed system without a properly sized and installed thermal expansion tank;

(11)fired at the proper voltage and wattage;

(12)maintained in accordance with the instructions printed in the manual included with the heater.

b.Any accident to the water heater, any misuse, abuse (including freezing) or alteration of it, any operation of it in a modified form, or any attempt to repair tank leaks will void this warranty.

4.SERVICE and REPAIR EXPENSE

Under this limited warranty the warrantor will provide only a replacement water heater or part thereof. The owner is responsible for all other costs. Such costs may include but are not limited to:

a.Labor charges for service, removal, repair, or reinstallation of the water heater or any component part;

b.Shipping, delivery, handling, and administrative charges for forwarding the new heater or replacement part from the nearest distributor and returning the claimed defective heater or part to such distributor;

c.All cost necessary or incidental for any materials and/or permits required for installation of the replacement heater or part.

5.LIMITATIONS ON IMPLIED WARRANTIES

Implied warranties, including any warranty of merchantability imposed on the sale of this heater under state law are limited to one (1) year duration for the heater or any of its parts. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

6.CLAIM PROCEDURE

Any claim under this warranty should be initiated with the dealer who sold the heater, or with any other dealer handling the warrantor’s products. If this is not practicable, the owner should contact:

U.S. Customers

Canadian Customers

A. O. Smith Water Products Company

A. O. Smith Enterprises, Ltd.

500 Tennessee Waltz Parkway

P. O. Box 310 - 768 Erie Street

Ashland City, TN 37015

Stratford, Ontario N5A 6T3

Telephone: 1-800-323-2636

Telephone: 1-800-265-8520

a.The warrantor will only honor replacement with identical or similar water heater or parts thereof which are manufactured or distributed by the warrantor.

b.Dealer replacements are made subject to in-warranty validation by warrantor.

7.DISCLAIMERS

NO OTHER EXPRESS WARRANTY HAS BEEN OR WILL BE MADE IN BEHALF OF THE WARRANTOR WITH RESPECT TO THE MERCHANTABILITY OF THE HEATER OR THE INSTALLATION, OPERATION, REPAIR, OR REPLACEMENT OF THE HEATER. THE WARRANTOR SHALL NOT BE RESPONSIBLE FOR WATER DAMAGE, LOSS OF USE OF THE UNIT, INCONVENIENCE, LOSS OR DAMAGE TO PERSONAL PROPERTY, OR OTHER CONSEQUENTIAL DAMAGE. THE WARRANTOR SHALL NOT BE LIABLE BY VIRTUE OF THIS WARRANTY OR OTHERWISE FOR DAMAGE TO ANY PERSONS OR PROPERTY, WHETHER DIRECT OR INDIRECT, AND WHETHER ARISING IN CONTRACT OR IN TORT.

a.Some states do not allow the exclusion or limitation of the incidental or consequential damage, so the above limitation or exclusion may not apply to you.

b.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Fill in the following for your own reference. Keep it. Registration is not a condition of warranty. The model and serial number are found on the heater’s rating plate.

Model No.________________________________________ Serial No.________________________________ Date Installed ________________

Dealer’s Name_________________________________________________________________________________________________________

Dealer’s Address _______________________________________________________________________Phone No. _______________________

City and State __________________________________________________________________________Zip ____________________________

18

Image 18
Contents Installation Operation Service Maintenance Limited Warranty AsmeSafe INSTALLATION, USE, and Service Important DefinitionsGeneral Safety Table of Contents IntroductionDimensions and capacities data Features and Components DHE Installation Locating the NEW Water HeaterRequired Ability TEMPERATURE-PRESSURE Relief Valve Circulating PumpInsulation Blankets Branch Circuit Power CircuitElectrical Heater CircuitsElectrical and recoveries data Wiring Diagrams Wiring Diagrams General Temperature RegulationOperation Start UPHigh Temperature Devices MaintenanceTemperature Adjustment Anode Inspection and ReplacementSediment Removal Temperature-Pressure Relief Valve OperationFlushing Water and Lime Scale RemovalTroubleshooting Checklist If YOU Cannot Identify or Correct the Source of MalfunctionWarranty Tank

DVE-150, DHE-200 specifications

A.O. Smith has established itself as a leading brand in the water heating industry, and its DVE-150 and DHE-200 models showcase the company's commitment to efficiency and innovation. Both units are designed to cater to residential and commercial water heating needs, offering a range of features that enhance performance and reliability.

The DVE-150 is a high-efficiency electric water heater that boasts a 150-gallon capacity. It is ideal for larger households or small commercial applications where hot water demand is significant. One of the standout features of the DVE-150 is its advanced heating element technology. This model uses high-density insulation that reduces heat loss, ensuring more effective energy use. The unit operates at a high recovery rate, allowing it to provide consistent hot water quickly, even during peak usage times.

On the other hand, the DHE-200 is a gas water heater, equipped with a 200-gallon capacity. This model is ideal for high-demand environments where large volumes of hot water are required. The DHE-200 incorporates an innovative direct vent system that enhances efficiency and safety by removing combustion gases from the living space. The modulating gas burner further ensures that the unit operates at optimal efficiency, adjusting the heat output based on the demand for hot water.

Both models feature an intuitive digital display that allows users to monitor and adjust their settings easily. Additionally, they come with advanced diagnostic tools that provide real-time feedback on the system's performance, making maintenance easier and more efficient.

Safety is a top concern for A.O. Smith, and both the DVE-150 and DHE-200 are designed with multiple safety features. These include high-temperature limit switches, pressure relief valves, and flame rollout switches, all of which work to protect the unit from potential hazards.

In terms of installation, both models offer flexible options. They are designed to fit in various spaces, accommodating different installation environments. This versatility is essential for both new constructions and retrofitting older systems.

The DVE-150 and DHE-200 are also backed by A.O. Smith's industry-leading warranty, providing customers with peace of mind regarding their investment. Overall, these models embody A.O. Smith's dedication to quality, efficiency, and safety, making them excellent choices for those in need of reliable water heating solutions.