ALL Dimensions in Inches Millimeters | A.O. Smith BTPV-650A specification

ALL DIMENSIONS IN INCHES (MILLIMETERS)

										Gas	Approx.
Models	A	B	C	D**	E***	F	G	H	I	Conn.	Ship. Wt.
BTP(V)-540A	80 3/4	73	32 1/4	9	6	26 1/2	93	29 1/2	48 1/2	1*	950
	2,051	1,854	819	229	152	673	2,362	749	1,232	25.4	431 kg

BTP(V)-650A	80 3/4	73	32 1/4	9	8	26 1/2	93	29 1/2	48 1/2	1*	950
	2,051	1,854	819	229	203	673	2,362	749	1,232	25.4	431 kg

BTP(V)-740A	80 3/4	73	32 1/4	9	8	26 1/2	93	29 1/2	48 1/2	1*	950
	2,051	1,854	819	229	203	673	2,362	749	1,232	25.4	431 kg

*Minimum gas supply pipe is 1 1/4”, reference Manual, Table 7 for gas supply pipe size.

**D dimension is for atmospheric vent size.

***E dimension is for direct and side-wall vent size.

BTP(V) SUGGESTED SPECIFICATION

GENERAL

Water heater(s) shall be Model______________as manufactured by A.O. Smith or equal. Water heater(s) shall be of glass-lined design and include a

powered gas burner, redundant main gas valves, gas pressure regulator and flame inspection port. Heater(s) shall have an input rating of ______and a

recovery rating of_________GPH at a temperature rise of 100°F with a maximum storage capacity of 85 gallons. Heater(s) shall be equipped with 1-1/2"

NPT water inlet and outlet openings and a boiler-type handhole cleanout. Heater(s), for barometric venting and under UL795 for sidewall/direct venting, shall be constructed and stamped in accordance with ASME Boiler and Pressure Vessel Code and be so marked for a maximum working pressure of 160 psi. Heaters shall include a high temperature limit control, dual bulb thermostat for accurate temperature control and anti-stacking compensation and a factory installed A.G.A. rated temperature and pressure relief valve. Heater(s) shall be equipped with multiple anodes for corrosion protection, insulated with polyurethane foam, and meet ASHRAE/IES 90.1-1999 requirements for thermal efficiency and standby loss, and meet SCAQMD R1146.2 low NOx requirements. Heater(s) shall have a minimum thermal efficiency 80%. The outer jacket shall have a baked enamel finish over a bonderized undercoat. All internal surfaces of the heater(s) exposed to water shall be glass-lined with an alkaline borosilicate, nickelous oxide composition that has been fused to steel by firing at a temperature range of 1,400°F. Heater(s) tank shall have a 3 year limited warranty against corrosion as outlined in the written warranty.

METHOD OF VENTING

BTP heater(s) shall be factory supplied with a Barometric Draft Regulator for conventional atmospheric venting using conventional venting materials. BTPV heater(s) shall be supplied with an optional vent kit allowing for horizontal sidewall venting or direct venting.

BURNER AND CONTROLS

Burner(s) shall be of the premix with internal FGR & thermal cutoff design. Design shall include a separate spark pilot ignition system. In addition, burner(s) shall have an integral blocked flue sensor, glass view port, main gas regulator, automatic gas valve, manual test cock and manual gas shutoff valve. Burner(s) must be factory installed, tested and started by an A. O. Smith Authorized BTP start-up agent before placing the unit(s) into operation.

A. O. Smith Water Products Company, Inc. On Line www.aosmithwaterheaters.com

For Technical Information and

Automated Fax Service

Phone: 800-527-1953

A. O. Smith

Water Products Company

Ashland City, TN

A Division of A. O. Smith Corporation

A. O. Smith Corporation reserves the right to make product changes or improvements at any time without notice.

A 108.0

Printed in U.S.A.

BTP-650A, BTP-540A, BTPV-650A, BTP-740A specifications

A.O. Smith has been a leading name in the water heating industry, known for its innovation and quality. The BTP series, including models BTP-540A, BTP-650A, BTP-740A, and the BTPV-650A, showcases the company's commitment to efficient heating solutions that meet diverse consumer needs.

The BTP-540A is designed for residential use, featuring a 40-gallon capacity that is perfect for smaller households. This model utilizes a high-efficiency gas burner that achieves an impressive first-hour rating, ensuring hot water is readily available when needed. The integrated smart technology monitors water usage patterns, optimizing heating cycles and improving energy efficiency.

Moving to the BTP-650A, this model boasts a larger 50-gallon capacity, making it suitable for medium-sized families. A.O. Smith incorporates advanced insulation technology in this tank to minimize heat loss, ensuring that energy is conserved effectively. Additionally, the BTP-650A features a user-friendly digital display that allows homeowners to easily adjust settings and monitor performance.

The BTP-740A is the powerhouse of the series, with a robust 75-gallon capacity, ideal for larger households or commercial applications. This model employs a dual heating system that enhances recovery rates, ensuring a consistent supply of hot water even during peak demand. The BTP-740A also includes multiple safety features, such as temperature relief valves and automatic shut-off settings, providing peace of mind for users.

Lastly, the BTPV-650A deviates slightly by featuring a hybrid design that combines a tank storage system with heat pump technology. This unique configuration allows for extraordinary energy efficiency, significantly reducing operational costs. The BTPV-650A can operate in various ambient temperatures, making it versatile for different climates.

All models in the BTP series come equipped with A.O. Smith's state-of-the-art control systems, promoting user-friendly experiences through real-time monitoring and diagnostics. The durable construction of these water heaters ensures longevity, while features like Wi-Fi connectivity in certain models allow for remote monitoring and management via smartphone apps.

In summary, the A.O. Smith BTP-540A, BTP-650A, BTP-740A, and BTPV-650A are designed with a strong focus on efficiency, capacity, and innovative technology, catering to a wide range of residential and commercial hot water needs.