Hearth and Home Technologies RC300 instruction

RC300

IntelliFire Plus™ Multifunction Remote Control

Installation & Operating Instructions

Hearth & Home Technologies disclaims any responsibility for, and the warranty will be voided by, the following actions:

•Installation and use of any damaged system component.

•Modiﬁcation of the system component.

•Installation other than as instructed by Hearth & Home Technologies.

•Installation and/or use of any component part not approved by Hearth & Home Technologies.

Any such action may cause a ﬁre hazard.

•Read, understand and follow these instructions for safe installation and operation.

Introduction

The RC300 multifunctional remote control is designed to control pilot light, ﬂame height, blower speed, and up to two 120 VAC auxiliary functions on your gas ﬁre- place. The RC300 is equipped with thermostat func- tions which can automatically control the temperature in the room in which it is installed. The control is only for use with the Hearth & Home Technologies IntelliFire Plus™ system (IPI). The AUX300 module is rated for 120 VAC, 60 Hz, and is required for operation of this remote control device.

Installation Precautions

This remote control is tested and safe when installed in accordance with this installation manual. Do not install any components that may be damaged.

Do not modify, disassemble, or substitute any of the com- ponents included with this kit. Installation of this unit must be done by a qualiﬁed service technician.

Placement of this remote control may affect performance. An assessment of the space should be done prior to in- stallation for optimum performance.

Determine Location

Determine the location for the remote control. The selected location should be in the same space as the gas ﬁreplace. Never place this unit in a separate room. The remote control must be placed within 30 feet (9.14 m) of the ﬁreplace but should not be exposed to extreme heat.

The RC300 is approved for interior installation and should not be used in exterior applications.

• Keep remote control out of reach of children.

FCC Requirements

WARNING! Risk of Fire! Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in ac- cordance with the instructions, may cause harmful in- terference to radio communications. However, there is no guarantee that interference will not occur in a partic- ular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit dif- ferent from that to which the receiver is connected.

•Contact the dealer or an experienced radio TV techni- cian for help.

Canadian Equipment Requirements

This digital apparatus does not exceed the (Class A/ Class

B)limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Cana- dian Department of Communications. Le present appareil numerique n’emet pas de bruits radioelectriques depas- sant les limites applicables aux appareils numeriques (de la class A/de la class B) prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des Communications du Canada.

This device complies with RSS-210 of Industry and Science Canada. Operation is subject to the following two condi- tions: (1) this device may not cause interference, and (2) this device must accept any interference, including interfer- ence that may cause undesired operation of the device.

Hearth & Home Technologies • RC300 Multifunction Remote Control • 2166-393 Rev. C • 9/10

RC300 specifications

Hearth and Home Technologies (HHT) has established itself as a leader in the home heating and fireplace industry, and one of its standout offerings is the RC300 remote control. This advanced device is designed to enhance the user experience for owners of HHT gas fireplaces and stoves, providing convenience, control, and efficiency.

The RC300 boasts several main features that make it a must-have accessory for any gas fireplace user. Firstly, its intuitive interface allows for easy navigation between different settings. Users can quickly adjust the flame height, control the heat output, and set the fireplace to start automatically using the convenient timer function. This is particularly useful for those who want to ensure their space is warm and welcoming on cold days without the need for constant manual adjustments.

One of the key technologies integrated into the RC300 is its advanced communication system, which utilizes radio frequency rather than infrared signals. This allows for seamless operation even when obstacles like furniture or walls are in the way, enabling users to control their fireplace from virtually anywhere within their home. Additionally, the RC300 features a robust battery backup system, ensuring reliable performance in case of a power outage.

Safety is another critical aspect associated with the RC300. The remote control features a safety lock, preventing unintended use by children or pets. This gives homeowners peace of mind knowing that their fireplace remains secure when not in use. Furthermore, the RC300 is compatible with a range of HHT models, making it a versatile option for various installations.

Another notable characteristic of the RC300 is its sleek and modern design. The remote is compact and lightweight, making it easy to hold and navigate. The electronic display provides clear feedback on the current settings, making adjustments straightforward even in dim lighting.

In conclusion, the Hearth and Home Technologies RC300 remote control is a valuable addition for anyone looking to enhance their gas fireplace experience. With its user-friendly interface, advanced communication technology, robust safety features, and modern design, the RC300 offers unparalleled convenience and control. For homeowners seeking an efficient and effective way to manage their heating solutions, the RC300 proves to be an essential tool in creating a comfortable and inviting environment.