Hearth and Home Technologies Fan Installation, Programming the RC300 to the Control Module

Page 3

Fan Installation

Insert the 3 prong plug from the fan into the receptacle located in the AUX300 module. See Figure 6.

Insert 3 prong plug from AUX300 module into REM/AUX receptacle of fireplace junction box.

AUX 300 MODULE

FAN CORD

Figure 6. Plug Fan into AUX300 Module

Programming the RC300 to the Control Module

CAUTION! Risk of burns! DO NOT program the remote control to the control module when fireplace is hot.

Verify the ON/OFF/REMOTE switch is in the REMOTE position. Green LED light will blink three times and wall switch will beep once 5 seconds later when ready. See Figure 7.

Using a small item (such as a paper clip) press and release the LEARN button located near the ON/OFF/ REMOTE switch. See Figure 7.

Control module will beep once and LED will blink green for 10 seconds.

While the LED is blinking, press the POWER button on the remote control. A double beep will come out of the control module to indicate that it has been programmed successfully.

NOTICE: Up to three remote controls can be programmed into the control module. Simply press a button on the other remote controls during the 10 second programming process to add another remote into the system. It is recommended to program only one RC300 remote control.

To clear memory in the control module, use a small item (such as a paper clip) to press and release the LEARN button. Control module will beep once and LED will blink green for 10 seconds DO NOT press any buttons on the remote during the ten seconds that the green LED blinks. The memory will be cleared. Note that the RC300 will not be programmed if it’s in STANDBY mode. Press the ON/ OFF button twice to switch to IDLE mode.

REMOTE POSITION

Figure 7. Programming RC300

Hearth & Home Technologies • RC300 Multifunction Remote Control • 2166-393 Rev. C • 9/10

3

Image 3
Contents Installation Precautions IntroductionDetermine Location Changing Temperature Scale Installation of Remote Control HousingAUX300 Module Installation Programming the RC300 to the Control Module Fan InstallationRC300 Wiring Diagram Function Buttons Idle When Remote is in on ModeStandby mode Display ScreenAdjusting Fan Speed About on ModeAbout OFF Mode Adjusting Flame HeightPower Outage Adjusting ThermostatAdjusting Timer Setting the Child LockSymptom Possible Cause Corrective Action Frequently Asked Questions/Troubleshooting

RC300 specifications

Hearth and Home Technologies (HHT) has established itself as a leader in the home heating and fireplace industry, and one of its standout offerings is the RC300 remote control. This advanced device is designed to enhance the user experience for owners of HHT gas fireplaces and stoves, providing convenience, control, and efficiency.

The RC300 boasts several main features that make it a must-have accessory for any gas fireplace user. Firstly, its intuitive interface allows for easy navigation between different settings. Users can quickly adjust the flame height, control the heat output, and set the fireplace to start automatically using the convenient timer function. This is particularly useful for those who want to ensure their space is warm and welcoming on cold days without the need for constant manual adjustments.

One of the key technologies integrated into the RC300 is its advanced communication system, which utilizes radio frequency rather than infrared signals. This allows for seamless operation even when obstacles like furniture or walls are in the way, enabling users to control their fireplace from virtually anywhere within their home. Additionally, the RC300 features a robust battery backup system, ensuring reliable performance in case of a power outage.

Safety is another critical aspect associated with the RC300. The remote control features a safety lock, preventing unintended use by children or pets. This gives homeowners peace of mind knowing that their fireplace remains secure when not in use. Furthermore, the RC300 is compatible with a range of HHT models, making it a versatile option for various installations.

Another notable characteristic of the RC300 is its sleek and modern design. The remote is compact and lightweight, making it easy to hold and navigate. The electronic display provides clear feedback on the current settings, making adjustments straightforward even in dim lighting.

In conclusion, the Hearth and Home Technologies RC300 remote control is a valuable addition for anyone looking to enhance their gas fireplace experience. With its user-friendly interface, advanced communication technology, robust safety features, and modern design, the RC300 offers unparalleled convenience and control. For homeowners seeking an efficient and effective way to manage their heating solutions, the RC300 proves to be an essential tool in creating a comfortable and inviting environment.