Harbor Freight Tools 69039 Anchoring Frame, Figure J Verify and Adjust Frame Measurements

Page 9

Anchoring Frame

TO PREVENT SERIOUS INJURY: Contact local utility companies to ensure that the installation area is free of pipes, cables, and other hazards BEFORE installing anchors or choosing installation area.

1.Position the frame in the desired installation location.

The location must be flat, level, and stable with good locations for the Anchors (14‑1).

2.Level the frame end-to-end and side-to-side.

3.Measure the width of the frame at front and back, it should be 10′ 2″ wide.

The distance diagonally in one direction should be equal to the distance diagonally in the other direction. If any measurements do not match, adjust the frame and retake measurements

until they are equal within a reasonable tolerance.

Note: If measurements cannot be made correct, then parts may not be seated together properly.

SAFETY

10′ 2″

A

B

10′ 2″

Figure J: Verify and Adjust Frame Measurements

4. Once the frame is positioned, leveled, and squared, anchor the four Corner Legs (23) as follows:

ASSEMBLY

a.Thread the Anchor (14-1) into the ground near the Corner Leg (23) until the top of the Anchor only extends about 3″ above the ground.

Note: Verify that there are no utility lines nearby before driving anchors. If there are rocks or other obstacles, holes may need to be

drilled first to allow proper anchoring.

b.Insert a Cable (14‑2) through the anchor and through the Corner Leg (23), as shown.

c.Pull the Cable (14‑2) tight and secure it using a Cable Clamp (14‑3). Tighten the two nuts on the Cable Clamp (14‑3) evenly to secure the Cable (14‑2).

d.Repeat for all four Anchors (14‑1) and Corner Legs (23).

Figure K: Anchoring

23

14-2

14-3

14-1

MAINTENANCE

Item 69039

For technical questions, please call 1-800-444-3353.

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Email our technical support at tech@harborfreight.com Portable GarageTable of Contents Use Precautions Assembly PrecautionsSafety Read all safety warnings and instructionsSpecifications Safety Assembly MaintenanceTo Prevent Serious Injury AssemblyFigure B Roof Assembly Overview Roof Frame Assembly35-2 Stud, Foot, and Leg AssemblyFigure H Stud Installation Stud InstallationAnchoring Frame Figure J Verify and Adjust Frame MeasurementsReleasing Ratchet Tie-downs Securing Ratchet Tie-downsAssembly Maintenance Door/Back Cover 19, 20 InstallationFlaps Inside frame ZipperFabric Tube Roof Cover 18 InstallationRecord Product’s Serial Number Here MaintenanceParts List and Diagram Parts ListAssembly Diagram Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Limited 90 Day Warranty

69039 specifications

Harbor Freight Tools 69039 is a powerful and versatile piece of equipment designed to meet the needs of both DIY enthusiasts and professionals. This heavy-duty 12-inch cutting capacity band saw is engineered for precision and efficiency in various cutting applications. Whether you are tackling woodworking, metalworking, or other fabrication tasks, the 69039 is equipped to handle a variety of materials with ease.

One of the standout features of the Harbor Freight Tools 69039 is its robust 1.5 HP motor, which delivers ample power for cutting through tough materials. This motor is paired with a variable speed control system that allows users to adjust the speed settings according to the material being cut. This versatility makes it suitable for different projects, from intricate designs to heavy-duty cuts.

The band saw includes a large table that provides a stable work surface, ensuring accuracy and safety during operation. The table can be easily tilted for angled cuts, allowing users to make bevel cuts up to 45 degrees. This flexibility is particularly beneficial for users who require precision in their work, such as when creating furniture or intricate joinery.

In addition to its cutting capabilities, the 69039 is designed with user safety in mind. It features a blade guard that helps protect users while operating the machine, and the adjustable tensioning system ensures that the blade remains tight for clean, consistent cuts. Furthermore, the machine is built with a sturdy frame to minimize vibrations, enhancing stability and control.

Another notable characteristic of the Harbor Freight Tools 69039 is its portability. The band saw is designed with built-in wheels, making it easy to move between job sites or to store when not in use. This portability does not compromise its durability, as the materials used in its construction are robust and designed to withstand the rigors of regular use.

Overall, the Harbor Freight Tools 69039 is a well-rounded band saw that combines power, versatility, and safety features. Whether you're a hobbyist or a seasoned professional, this tool can significantly enhance your woodworking or metalworking projects, making it a valuable addition to your workshop. With its range of features and solid construction, it's no wonder that this band saw has become a go-to option for many craftspeople and contractors alike.
Top Page Image Contents