Harman-Kardon PT2500 owner manual System Remote Control

Page 8

•PT2500(g).qx 10/23/96 7:36 AM Page 7

System Remote Control

6

Using the Reference Card supplied with this manual, familiarize yourself with each of the controls on the PT2500’s infrared remote control. This section of the manual will also serve as a quick ref- erence to the operation of any of these controls.

aTransmitter Window: An infrared beam is transmitted from this window when you press any but- ton on the remote. For the remote to function properly always point this window toward the remote sensor on the PT2500 and do not obstruct this window.

Remote Control

Operation Range

bPower Button: Press this button to turn the PT2500 on or off.

NOTE: In order for this button to work, the PT2500 must first be placed in the standby mode by pressing the front panel Power switch 1 until it is engaged and the ring surrounding the switch turns amber.

cUp/Down Tuning Buttons: Press these buttons to manually tune higher or lower frequency stations.

dNumeric Buttons: Press these buttons to select one of the stations stored in the unit’s memory.

eCD Function Controls: These buttons will control the functions of a compatible Harman Kardon CD player or multi disc changer.

fInput Select Buttons: Press one of these buttons to choose an input source.

Note: Automatic Power On: When you press any Input Select Button while the unit is in the Standby Mode, the system will automatically be turned on.

gDelay Time Adjust: Press this button to adjust the amount of delay between the sounds heard from the front and surround speakers. This function is only available in the Dolby ProLogic, Theater and Stadium modes.

hSurround Mode Selectors: Press one of these buttons to choose a surround processing mode. Press the OFF button to cancel the surround processing for conventional stereo reproduction.

iCenter Level Up/Down Buttons: These buttons adjust the center channel volume relative to that of the other speakers. They operate only in the Dolby ProLogic and Dolby 3 Stereo modes.

jRear Level Up/Down Buttons: These buttons adjust the volume of the rear (Surround) channels relative to that of the other speakers. They operate only in the Dolby ProLogic, Theater and Stadium modes.

kDisplay Dim: Press this button to dim the brightness of the front panel display. A second press turns that display off completely and a third press returns the displays to their normal brightness level.

lSleep Timer Button: Press this button to activate the sleep timer. Each press increases the amount of time before the unit will turn off, in the following sequence:

 

10

 

20

 

30

 

60

 

90

 

OFF

 

 

min

 

min

 

min

 

min

 

min

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mMute Button: Press this button to momentarily silence the speakers. Note that the Mute/Volume Indicator

&will flash to remind you that the Mute function is engaged. Press the button again to return to the previ- ously selected listening level.

nMaster Volume Control: Press this button to raise or lower the over- all system volume to all speakers.

oCenter Mode Select: Press this button to select the center channel mode. Each press of the button changes the mode in the following sequence:

Normal ‡ Wide‡ Phantom

pTest Mode Select: Press this button to have a test signal noise appear in sequence through the left, center, right and surround speakers so that relative volume may be adjusted.

qCassette Deck Controls: These buttons control the functions of com- patible Harman Kardon cassette decks.

rPreset Scan Button: Press this button to scan the stations entered in the unit’s memory. When the desired station is reached, press the button again to stop the scan.

sBattery Compartment: Install two “AA” batteries as shown to power the remote control.

Slide the cover on the battery compart- ment as shown to remove. Insert the batteries being certain to observe proper polarity.

PT2500 rev (G) 10/23/96

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Harman Kardon PT2500 VSurround Tuner Controller Table of Contents Introduction and Safety Information FeaturesSystem remote control Remote Trigger Control for PA5800 Verify Line Voltage Before UseInstallation Location CleaningDo Not Open The Cabinet Catv or Antenna GroundingUnpacking and Installation Number within a square references a front panel controlFront Panel Controls Rear Panel Connections System Remote Control Power Button Press this button to turn the PT2500 on or offIf the PT2500’s front panel remote sensor Installation & ConfigurationCbato the appropriate input jacks of a power amplifier When using the PT2500 with an external To calibrate your system, follow these steps Delay SettingOutput Level Calibration Center Channel Mode Surround Mode Options OperationManual Tuning Auto TuningPreset Tuning Recalling Preset StationsTroubleshooting If the problem is Make sure thatSpecifications Preamplifier SectionTuner Section FM Tuner Section AM

PT2500 specifications

The Harman-Kardon PT2500 is a noteworthy addition to the realm of audio equipment, known for its blend of performance, design, and innovative technologies. Aimed at audiophiles and casual listeners alike, this audio system exemplifies the brand's commitment to delivering high-quality sound experiences.

One of the standout features of the PT2500 is its advanced amplification technology. With a powerful output, it ensures that audio is delivered with clarity and precision, whether you’re listening to soft melodies or booming bass lines. The integrated amplifier is designed to optimize audio performance and can handle a wide range of speakers, allowing users to create a bespoke sound system tailored to their needs.

The PT2500 employs Harman-Kardon's proprietary technologies, including their signature surround sound processing. This feature allows users to enjoy an immersive audio experience, making movies, music, and games come alive with rich soundscapes. The system is equipped with multiple audio decoding capabilities, such as Dolby Digital and DTS, ensuring compatibility with various formats and content types.

In terms of connectivity, the PT2500 offers versatile options, catering to modern digital demands. With multiple inputs including HDMI, optical, and analog connections, users can connect various devices such as televisions, gaming consoles, and streaming players. Additionally, Bluetooth capability enables wireless streaming from smartphones and tablets, enhancing convenience and flexibility.

The design of the Harman-Kardon PT2500 is both aesthetic and functional. Its sleek, modern look is complemented by intuitive controls, allowing users to navigate settings effortlessly. The build quality reflects Harman-Kardon's commitment to craftsmanship and longevity, ensuring that the product not only looks good but also stands the test of time.

Another key characteristic is the customizable audio settings, which allow users to tailor their listening experience to their preferences. Whether it's adjusting bass levels or fine-tuning treble, the PT2500 accommodates individual tastes and room acoustics, ensuring optimal sound delivery.

In conclusion, the Harman-Kardon PT2500 stands out as a remarkable audio system that combines performance, versatility, and style. With its array of features and technologies, it caters to the diverse needs of today’s audio enthusiasts, making it an excellent choice for those seeking to elevate their listening experience. Whether at home or in a dedicated media room, the PT2500 promises to deliver high-quality sound that resonates with every listener.
Top Page Image Contents