Adjustment Guide Speed Settings, Change Speed Setting

ADJUSTMENT GUIDE - SPEED SETTINGS

Speed settings are pre-programmed at the factory for the maximum speed. Speed settings should not need adjustment with this unit.

However, travel speed for the opener in both the open and close directions can be adjusted to slower speeds to minimize normal wear for heavy sectional doors.

NOTE: One piece doors are automatically set during Limits programming to the slowest speed and opener speed cannot be reset for one piece doors.

FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM

CHANGE SPEED SETTING

Use this guide to ADJUST powerhead SPEED settings.

There are three (3) Speed settings available on this unit for the open and close directions. Door type (one piece or sectional), door weight and balance, and condition of door components / track affect door speed. Speed adjustment may not be available for some installations depending on these factors.

PROGRAM

1.Press on the powerhead and hold until both

SET

lights turn steady ON. Release button.

Lights go out and Round BLUE light comes ON.

2.Press two times and the Round BLUE and Long BLUE lights come ON.

PROGRAM

3.Press once to enter the Speed Programming

SET

menu. The round LED will flash BLUE 3 times, then the current Speed setting for UP travel will display on the LEDs. See table below.

4.Press to raise or to lower UP Speed settings within the available range.

NOTE: Faster door speeds may not be available.

PROGRAM

5.Press to set UP Speed level. The long LED will

SET

flash BLUE 3 times, then the current Speed setting for DOWN travel will display on the LEDs.

6.Press to raise or to lower DOWN Speed settings within the available range.

NOTE: Faster door speeds may not be available.

PROGRAM

7.Press SET to set DOWN Speed level. Both LEDs flash BLUE to confirm.

Speed Level

Powerhead LEDs

Round LED Long LED

Default LED display is the current Speed setting

Red Red

LED Speed indicator colors

Purple

Blue Blue

Speed Level LED indicator colors

MAXIMUM

MID

SLOW

Red	Red
ON	ON
Purple	Purple
ON	ON
Blue	Blue
ON	ON

12/2010

3024H, 3024 specifications

The Genie 3024 and 3024H are part of Genie’s renowned line of compact scissor lifts, designed primarily for vertical access to elevated workspaces in various environments. With a remarkable blend of performance and ease of use, these models cater to the needs of contractors, maintenance crews, and facility managers alike.

One of the standout features of the Genie 3024 and 3024H is their impressive working height, which reaches up to 30 feet. This elevates the platform’s capabilities, allowing operators to complete tasks efficiently in tight spaces. The platform itself is spacious, providing ample room for tools and materials, which enhances productivity on the job site.

Both models are equipped with Genie’s patented Fast Mast technology, enabling users to elevate the platform quickly to the desired height while keeping the base on the ground. This feature significantly reduces downtime, making it easier for operators to complete tasks efficiently without unnecessary delays. This characteristic is especially beneficial in industries where time is of the essence.

The Genie 3024 and 3024H also come with a robust electric drive and hydraulic system, ensuring smooth and reliable operation both indoors and outdoors. Their compact size and tight turning radius allow them to navigate through narrow aisles and doorways with ease, making them ideal for use in warehouses, retail spaces, and smaller construction sites.

The models are designed with safety and stability in mind. They include features such as non-slip surfaces on the platform, automatic cut-off systems, and guardrails to ensure secure usage during operation. Additionally, the units are equipped with integrated wheel brakes that enhance safety when the lifts are stationed in elevated positions.

The Genie 3024H variant offers added flexibility with its high-capacity battery system, providing extended work cycles without the interruption of recharging. This makes the 3024H particularly suitable for extended job sites and projects where access to power might be limited.

In summary, the Genie 3024 and 3024H scissor lifts deliver an array of features that enhance both performance and safety, making them invaluable tools for anyone needing reliable vertical lift solutions. With a focus on compact design, quick operational capabilities, and enhanced safety measures, these models exemplify Genie’s commitment to meeting the evolving needs of the construction and maintenance industries.