Genie 3024H manual Test, Adjustment

Page 8

8

 

CONTACT REVERSE TEST

 

 

 

 

 

The Force and Limit settings on the previous page MUST be COMPLETED before Contact

 

Reverse testing.

 

1. Test.

 

 

• Open garage door using wall console.

©2010

 

– Place a 2" x 4" board (laid flat) under center of garage door opening.

 

• Close garage door using wall console.

The

 

• When door contacts board, the door must stop (within 2 seconds) and reverse direction

 

returning to open position.

Genie

2. Adjustment.

 

Company

 

• If the door:

 

– Stops before it contacts the 2 x 4 board, it may simply be responding to an improperly set

 

 

down limit. Return to pages 6-7 and repeat steps 1 through 10 to correct down limit.

 

 

– Stops after contacting the 2 x 4 board and does not reverse it may need an adjustment to

 

 

the down limit. Return to pages 6-7 and repeat steps 1 through 10 to correct down limit.

 

 

• Test again. Repeat as necessary until door reverses upon contacting board.

PRESS and RELEASE

2

3

12/2010

DOOR OPENS

WARNING

A moving door can cause serious injury or death.

1.Keep people clear of opening while door is moving.

2.Do NOT allow children to play with opener, including wall console, remote, or wireless keypad.

3.During programming, door opener could begin to run, so stay away from moving door and its parts.

On Wall Console

1PRESS and RELEASE

4

Once the Contact Reverse Testing is complete continue with Programming Remotes on the next page.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operation and Maintenance Manual Potential Hazard PreventionOpener Features Safety FeaturesTable of Contents Important Installation Instructions Infrared Protection FunctionProgramming Limits & Force Close Door Travel LimitOpen Door Travel Limit See long Blue LED flashingDoor Limits are set Both LEDs flash Blue Go OFFAdjustment TestBring remotes to powerhead location See long Purple LED flashingIntelliCode 1 remotes See round Blue LED come onGenie IntelliCode 1 wireless keypad Genie IntelliCode 1 remoteSee one See long Purple LED flashing + see both LEDs Flash PurpleReference Powerhead & Rail Assembled View Power Head Tête DE Puissance Cabeza DE LA EnergíaInstallation Typique SUR UNE Porte Sectionelle Typical ONE Piece Door Installation Programming Buttons location Overview of Powerhead ControlsOn powerhead Overview Remotes and Options HoldLights go out and Round Blue light comes on This device complies with FCC Part 15 and RSSIntellicode Features Maintenance & Troubleshooting Transmitter Compliance StatementRoutine Monthly Maintenance AdjustmentSafe-T-Beam System Check Door balance Contact reverse Door Balance Spring TensionReset OPEN/CLOSE Travel Limit DoorChange Light Bulbs Motion DETECTOR* OverviewWire routing Wall Console OverviewOpen and closes door from inside garage Closed Unlock allows controls to work normallyChain or Belt Tension Adjustment Remote Battery ReplacementBelt ChainPowerhead LEDs Round LED Long LED Adjustment Guide Speed SettingsChange Speed Setting Adjustment Guide Force Settings Change Force SettingTroubleshooting Guide Operation Powerhead LED Possible Problem Solution Reference Circuit Wiring Diagram Opening Cover May Cause Electric ShockLimited Warranty
Related manuals
Manual 26 pages 22.11 Kb

3024H, 3024 specifications

The Genie 3024 and 3024H are part of Genie’s renowned line of compact scissor lifts, designed primarily for vertical access to elevated workspaces in various environments. With a remarkable blend of performance and ease of use, these models cater to the needs of contractors, maintenance crews, and facility managers alike.

One of the standout features of the Genie 3024 and 3024H is their impressive working height, which reaches up to 30 feet. This elevates the platform’s capabilities, allowing operators to complete tasks efficiently in tight spaces. The platform itself is spacious, providing ample room for tools and materials, which enhances productivity on the job site.

Both models are equipped with Genie’s patented Fast Mast technology, enabling users to elevate the platform quickly to the desired height while keeping the base on the ground. This feature significantly reduces downtime, making it easier for operators to complete tasks efficiently without unnecessary delays. This characteristic is especially beneficial in industries where time is of the essence.

The Genie 3024 and 3024H also come with a robust electric drive and hydraulic system, ensuring smooth and reliable operation both indoors and outdoors. Their compact size and tight turning radius allow them to navigate through narrow aisles and doorways with ease, making them ideal for use in warehouses, retail spaces, and smaller construction sites.

The models are designed with safety and stability in mind. They include features such as non-slip surfaces on the platform, automatic cut-off systems, and guardrails to ensure secure usage during operation. Additionally, the units are equipped with integrated wheel brakes that enhance safety when the lifts are stationed in elevated positions.

The Genie 3024H variant offers added flexibility with its high-capacity battery system, providing extended work cycles without the interruption of recharging. This makes the 3024H particularly suitable for extended job sites and projects where access to power might be limited.

In summary, the Genie 3024 and 3024H scissor lifts deliver an array of features that enhance both performance and safety, making them invaluable tools for anyone needing reliable vertical lift solutions. With a focus on compact design, quick operational capabilities, and enhanced safety measures, these models exemplify Genie’s commitment to meeting the evolving needs of the construction and maintenance industries.
Top Page Image Contents