Chicago Electric 65712 manual Troubleshooting, Problem Possible Causes Possible Solutions

Page 28

Troubleshooting

Problem

 

Possible Causes

 

Possible Solutions

Opener does not

1.

No power at outlet.

1.

Check power at outlet.

operate with Remote.

2.

Power Cord not connected.

2.

Check that Power Cord is plugged in.

 

 

3.

Garage Door is locked.

3.

Disengage all locks on Garage Door.

 

4.

Excessive build-up of ice, snow, dirt,

4.

Clean out from under Garage Door.

 

 

and/or debris under Garage Door.

 

 

 

5.

Garage Door is frozen to the ground.

5.

Thaw out area under Garage Door.

 

6.

Remote Control Battery low.

6.

Replace Remote Control Battery.

 

7.

Opener and Remote Control not

7.

Program both Opener and Remote Control.

 

 

properly programmed.

 

 

 

8.

Door Control Button flashing. Opener

8.

If you have a “multi-function” Door Control, push and

 

 

is in “lock” mode.

 

hold the Lock Button for 2 seconds. The Door Control

 

 

 

 

Button will stop flashing.

Remote Control has

1.

No Battery or low Battery.

1.

Make sure a fully charged Battery is installed in Remote

short range.

 

 

 

Control.

 

2.

Obstacle within auto blocking Remote

2.

Change the location of the Remote Control in the auto.

 

 

Control transmission.

 

 

 

3.

A metal Garage Door, foil-backed

3.

Install a wood Garage Door. Remove foil-backed

 

 

insulation, or metal siding will reduce

 

insulation and/or metal siding.

 

 

the transmission range.

 

 

Garage Door reverses

1.

Garage Door is being obstructed.

1.

Pull Manual Release Handle. Operate Door manually.

for no apparent

 

 

 

If the Door is unbalanced or binding, have a qualified

reason, and Opener

 

 

 

service technician repair.

Light does not blink.

2.

Excessive build-up of ice, snow, dirt,

2.

Clean out from under Garage Door.

 

 

and/or debris on area where Garage

 

 

 

 

Door closes.

 

 

 

3.

Improper adjusted “Setting Limits”

3.

Properly adjust “Setting Limits” and “Force”. Repeat

 

 

and “Force”.

 

“Safety Reverse Test” after adjustments are made.

Garage Door opens

Remote Control Push Button stuck in

Make sure Remote Control Push Button operates freely.

and closes by itself.

“ON” position.

 

 

Garage Door stops,

“Setting the Limits” function improperly

Properly adjust the “Setting the Limits” function. Repeat

but does not close

adjusted.

“Safety Reverse” test after any adjustment of Door arm

completely.

 

 

length, close force, or down limit.

Opener Light does not

Burned out Bulb.

Replace old Bulb with a new 25 Watt Bulb.

turn on.

 

 

 

 

Opener strains.

Garage Door may be unbalanced or

Close Garage Door and use Manual Release Rope and

 

Springs are broken.

Handle to disconnect Trolley. Open and close Door

 

 

 

manually. A properly balanced Door will stay in any point

 

 

 

of travel while being supported entirely by its Springs. If

 

 

 

it does not, have a qualified service technician correct the

 

 

 

problem.

Opener Motor “hums”

Garage Door Springs are broken. If

See above. Disable all Door locks. Repeat “Safety

briefly, then will not

problem occurs on first operation of

Reverse” test after adjustment is complete.

work.

Opener, the Garage Door is locked.

 

 

Opener will not

No electrical power to unit.

Pull Manual Release Rope and Handle down and back

activate due to power

 

 

to disconnect Trolley. Door can be opened and closed

failure.

 

 

manually. When power is restored, pull the Manual

 

 

 

Release Handle straight down. The next time the Opener is

 

 

 

activated, the Trolley will reconnect.

Follow all safety precautions whenever diagnosing or servicing the Garage Door Opener. Disconnect power supply before service.

SKU 65712

For technical questions, please call 1-800-444-3353.

Page 28

Image 28
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsContents Important Safety Information Save This ManualPower equipment is dangerous in the hands of untrained users Specific Safety Warnings Grounding Double Insulated Tools Tools With Two Prong PlugsCal Code. See Outlets for 2-Prong Plug See Outlets for 2-Prong PlugSee Table a 25’ 50’ 75’Specifications UnpackingAssembly Figure C See Figure D SKU For technical questions, please callFigure F Figure H See Figure HSee Figures I and J Provided. See Figures I and JFigure K See Figure KFigure M See Figure MSee Figure O, Illustration a Figure OFigure P Setting Remote Control Codes SecondSetting Opening Limit See Figures T and USetting Closing Limit Figure WSetting Opening Force 99-1Setting Closing Force Figure JJSetting Automatic Closing Time 99-0Figure WW To test the safety reverse system Maintenance Servicing Please Read Following CarefullyTroubleshooting Problem Possible Causes Possible SolutionsRecord Product’s Serial Number Here Assembly Diagram Limited 90 DAY Warranty

65712 specifications

The Chicago Electric 65712 is a versatile and powerful tool that has gained significant attention among DIY enthusiasts and professionals alike. As a popular model in the world of electric tools, the 65712 stands out due to its impressive performance and user-friendly features.

One of the key features of the Chicago Electric 65712 is its robust motor, which provides ample power for various tasks. With a high wattage output, this tool can handle demanding applications such as cutting through thick materials or performing intricate tasks with precision. The durable construction of the tool guarantees longevity, enabling users to rely on it for years to come.

Another notable aspect of the Chicago Electric 65712 is its ergonomic design. The tool is engineered with user comfort in mind, minimizing fatigue during extended use. The comfortable grip allows for better control and maneuverability, ensuring accuracy in every project. Additionally, the lightweight design makes it easy to handle, even in tight spaces where heavier tools may struggle.

In terms of technology, the Chicago Electric 65712 is equipped with advanced features that enhance its functionality. The inclusion of variable speed settings enables users to adjust the tool’s performance according to the task at hand. This adaptability offers greater control, whether one is working on delicate projects or heavier-duty cutting.

Safety is also a top priority with the 65712 model. The tool features safety locks and guards that protect users from accidental starts or injuries, making it suitable for both novices and experienced users. The design complies with industry standards, ensuring reliable operation while adhering to safety protocols.

Versatility is another hallmark of the Chicago Electric 65712. It can be used for a wide variety of applications, including woodworking, metalworking, and crafting. This adaptability allows users to tackle different projects without the need for multiple tools, making it an economical choice.

The Chicago Electric 65712 is not just about power; it also emphasizes user convenience. With easy-to-access controls and a design that facilitates quick changes of blades or bits, users can spend less time setting up and more time executing their projects.

Overall, the Chicago Electric 65712 combines power, safety, and versatility, making it an invaluable addition to any tool collection. Its features and technologies cater to a wide audience, from casual hobbyists to serious professionals, ensuring that every user can achieve excellent results in their work.