Chamberlain 1703EML installation instructions Representative Locking Mechanism

Representative Locking Mechanism

CAUTION

To prevent damage to garage door and operator: Ensure that turning the outside handle will not actuate ANY of the locking mechanisms supplied with the door.

•Remove all door latching mechanisms (Figure 3), and secure any locking bars in the open position.

1 FIGURE 3

1

3

4

6

5

				FIGURE 4
1.	Spring	4.	Canopy Door
2.	Latch	5.	Inside of Canopy Door
3.	Door Plate	6.	Remove inside Door
			Handle

•Remove inside door handle but leave the barrel in place in door (Figure 4).

•Ensure that turning the outside handle will not actuate ANY of locking mechanism supplied with the door. Failure to do so will result in serious damage to your door and operator. This is not covered by the Manufacturer’s Warranty.

FIGURE 6

1

5 2

3

4

6

•Disengage the outer trolley from the inner trolley by pulling down the manual release rope and handle (Figure 6).

•Connect and secure the extension arm to outer trolley with the clevis pin and ring fastener provided with the garage door operator.

1. Trolley		4.	Extension Arm
2.	Clevis ring	5. Trolley disengage lever
3.	Bolt	6.	Manual release

1

2

FIGURE 5

•. Unbolt the extension arm from the door arm (Figure 5).

1. Connection Arm 2. Canopy Door Arm

114A3167A-GB 3