Harman-Kardon HK3490 owner manual Step Five Connect the Video Display, Step Eight Plug In AC Power

Page 21

Step Five – Connect the Video Display

Only video connections should be made between the receiver and your video display (TV), unless your TV is the source for your television programming (see note below Figure 18).

To view video or images played by your source devices, connect the Video Monitor Output of the HK 3490 to a Composite Video Input on your television or video display. See Figure 21. Consult the manual for your TV so that you understand how to select the correct video input.

HK 3490

Figure 21 – Video Monitor Output

Step Six – Connect the Remote IR Input and Output (Optional)

The HK 3490 is equipped with a Remote IR Input and a Remote IR Output to facilitate use of your system with a remote control in a variety of situations.

When the HK 3490 is placed in such a way that aiming the remote at the front-panel IR sensor is difficult, such as inside a cabinet or facing away from the listener, you may connect an external IR receiver, such as the optional Harman Kardon HE 1000, to the Remote IR Input jack.

If any of your source devices are equipped with a compatible Remote IR Input, use a 1/8" mini-plug interconnect cable (not included) to connect the HK 3490’s Remote IR Output to the source device’s Remote IR Input, which will pass any applicable remote signals transmitted through the HK 3490 to the source device. This enables you to control your sources even when the HK 3490 itself is controlled via an external

IR receiver.

To control more than one source device using the Remote IR Output, connect all sources in “daisy chain” fashion, with the HK 3490’s Remote IR Output connected to the first device’s Remote IR Input, that device’s Remote IR Output connected to the next device’s Remote IR Input, and so forth. See Figure 22.

HK 3490

Figure 22 – Remote IR Input and Output

NOTE: Not all remote-controllable devices are equipped with compatible IR inputs and outputs. Check with the manufacturer of the source device for more information on the type of IR signal expected. The HK 3490 will output a “stripped carrier” IR signal.

INSTALLATION

Step Seven – Connect Optional External Equipment

If you wish to use the HK 3490 with an external power amplifier, remove the jumpers connecting the Preamp Outputs and Main-Amp Inputs. Store the jumpers in a safe place in case they are needed in the future. Connect the left and right Preamp Outputs of the HK 3490 to the analog audio inputs on the external power amplifier. See Figure 23.

HK 3490

Figure 23 – Preamp Outputs and Main-Amp Inputs

You may adjust the Volume and Tone Controls using the HK 3490’s front panel or remote (volume only).

If you wish to install an external processor, such as an equalizer, connect it to the Preamp Outputs and Main-Amp Inputs. Remove the jumpers and store them in a safe place. Connect the HK 3490’s Preamp Outputs to the processor’s analog audio inputs, and then connect the processor’s analog audio outputs to the Main-Amp Inputs on the HK 3490.

Alternatively, you may connect the external processor to the HK 3490’s Tape Monitor Loop. See Figure 16.

Step Eight – Plug In AC Power

Having made all of your wiring connections, it is now time to plug each component’s AC power cord into a working outlet.

You may plug two devices into the AC Switched Accessory Outlets on the rear of the HK 3490. See Figure 24. Make sure each device draws no more than 100 watts. The devices should have their mechanical or master power switches turned on, and they will power on any time the HK 3490 is turned on.

HK 3490

Figure 24 – AC Switched Accessory Outlets

Step Nine – Insert Batteries in Remote

The HK 3490 remote control uses four AAA batteries, which are included.

To remove the battery cover located on the back of the remote, squeeze the tab and lift the cover.

Insert the batteries as shown in the diagram, making sure to observe the correct polarity. See Figure 25.

21

Image 21
Contents Page Important Safety Instructions Safety InformationImportant Safety Information Page Table of Contents Introduction FRONT-PANEL Controls FM Mode DSP Mode Power REAR-PANEL Connections DVD REAR-PANEL Connections Tape Controls CD recorders CD Controls CD players Remote Control FunctionsXM Controls the HK 3490 and its internal tuner only Been selectedFM Mode Remote Control Functions Connections Connecting Source Devices to the HKSpeaker Connections SubwooferAudio Connections AntennasVideo Connections Digital AudioSpeaker Placement Speaker PlacementStep One Connect the Speakers InstallationStep Two Connect the Subwoofer Step Three Connect the AntennasTape Phono TurntableVideo 1 Source Compact Disc CD PlayerVideo 2 Source Video 3 SourceDocking Station Step Five Connect the Video Display Step Eight Plug In AC PowerStep Six Connect the Remote IR Input and Output Optional Step Seven Connect Optional External EquipmentStep Ten Turn On the HK Front-Panel Power SwitchOperation Headphones Speaker 1/2Source Selection Press the AM, FM or XM Button on the remote Using the Tuner AM, FM and XM ModesUsing Docking Station Auto Preset FM OnlyUsing the XM Radio Tuner Using The BridgeUnit will return to Standby mode, and you may power it on Processor ResetDim Function MemoryTroubleshooting Guide NTSC/PAL/SECAM HK 3490 Technical SpecificationsTable A1 Remote Control Device Types AppendixTable A2 Subwoofer Trigger Output Operation VID Table A3 Remote Control Function List

HK3490 specifications

The Harman-Kardon HK3490 is an exceptional stereo receiver that combines power, versatility, and timeless design to cater to audiophiles and casual listeners alike. Known for its impressive sound quality, the HK3490 is a solid choice for anyone looking to enhance their home audio experience.

One of the standout features of the Harman-Kardon HK3490 is its powerful amplification. With a 120 watts per channel output, this receiver is capable of driving even demanding speakers with ease. Whether you're enjoying a quiet evening at home or hosting a lively gathering, the HK3490 delivers clean, dynamic sound that fills any room. The unit is equipped with an advanced high-current, low-impedance design, ensuring robust performance across a wide range of speakers.

In terms of connectivity, the HK3490 is equipped with an array of options. It offers multiple audio inputs, including six stereo line inputs, a dedicated phono input for vinyl enthusiasts, and a 2-channel tape monitor, allowing users to connect various audio sources seamlessly. The receiver also features a built-in AM/FM tuner with 30 presets, making it easy to enjoy your favorite radio stations.

The HK3490 further incorporates sophisticated technologies designed to enhance sound quality. Harman-Kardon's proprietary technologies, such as the Logic 7 processing, provide a rich, immersive audio experience that preserves the integrity of the original recording. This technology ensures that stereo signals are transformed into a surround sound experience, making your music, movies, or games more engaging.

Another important aspect of the HK3490 is its aesthetic appeal. The receiver features a sleek, classic design with a brushed aluminum front panel complemented by a large, easy-to-read display. The intuitive layout of knobs and dials makes it user-friendly, allowing for easy adjustments to volume and tuning.

Moreover, the HK3490 is designed with durability in mind. Its robust construction ensures that it can handle the rigors of daily use, while its thermal protection circuits prevent overheating, allowing for reliable performance over extended periods.

In summary, the Harman-Kardon HK3490 is a versatile, high-performance stereo receiver that caters to a wide range of audio needs. With its powerful amplification, extensive connectivity options, and advanced sound technologies, it stands out as a premium choice for anyone looking to elevate their listening experience. Whether you are a seasoned audiophile or simply enjoy quality sound, the HK3490 is a worthy addition to any audio setup.