Harman-Kardon Complete Guide for Harman Kardon 3490 Installation and Docking Station Usage
Page 20

INSTALLATION

Video 2 Source

The Video 2 source is used only for playback. Since the remote is preprogrammed to operate a Harman Kardon DVD player when the Video 2 source is selected, we recommend that you connect a DVD player to the Video 2 Inputs.

You may have observed that the HK 3490 does not feature surround sound decoding, other than Dolby Virtual Speaker. If you prefer the complete home theater experience, you may wish to consider purchasing a full-featured Harman Kardon AVR Series audio/video receiver. However, we hope you will find that using a DVD player with the HK 3490 in smaller settings, such as a bedroom or den, surpasses the audio performance of most televisions, including those with onboard stereo speakers.

Connect the left and right analog audio outputs of the DVD player to the Video 2 Audio Inputs on the HK 3490. Then connect the composite video output of the DVD player, usually colored yellow, to the Video 2 Video Input. See Figure 18.

HK 3490

Figure 18 – Video 2 Audio and Video Inputs

NOTE: If you receive your television programming using your TV with an antenna or direct cable connection, connect the TV’s analog audio outputs (if available) to the Video 2 Analog Audio Inputs. Do not connect any video output on the television set to any Video Input on the receiver. See Step Five for information on connecting the receiver’s Video Monitor Outputs to the television.

Video 3 Source

The Video 3 source is used only for playback.The Video 3 source has two sets of input jacks, one located on the HK 3490’s rear panel and one set on the front panel. If you wish to connect a video device more or less permanently, you may prefer to connect it to the rear-panel inputs for a neater appearance. You may prefer to reserve the front- panel inputs for devices connected on a temporary basis, such as an iPod (not included), a camcorder, a game console, or another type of media player with analog audio and/or video outputs.

You may connect devices to both the front- and rear-panel inputs simultaneously. To select either device, press the Video 3 Source Selector on the HK 3490’s front panel or remote repeatedly. When VIDEO 3 appears on the front panel of the HK 3490, the rear-panel inputs are active. When VIDEO F appears, the front-panel inputs are active.

Connect the left and right analog audio outputs of your device to the corresponding Video 3 Inputs on either the front or rear panel, and if available, connect the composite video output of the device to the Video 3 Video Input on the same panel. See Figure 19.

Top Leaders

HK 3490

Figure 19 – Front- and Rear-Panel Video 3 A/V Inputs

To connect an iPod to the Video 3 Inputs, insert the 1/8" mini plug on the A/V cable included with the HK 3490 into the headphone jack of the iPod. Insert the left and right analog audio plugs on the other end of the A/V cable into the Video 3 Audio Inputs on the front of the receiver. If the iPod is capable of playing videos or displaying images, insert the composite video plug of the A/V cable into the Video 3 Video Input.

NOTE: The iPod classic, iPod touch and iPhone require a special cable (not included) for video playback through the HK 3490. The cable features a dock receptacle at one end, and conventional A/V plugs at the other end that may be connected to the

HK 3490 as described above. Visit www.apple.com for more information about the cable.

When the front-panel inputs and tone controls are not in use, place the supplied covers over them for a cleaner appearance by snapping the covers in place. To remove the covers, gently press on the left side of each cover so that it pivots out.

Since the remote is preprogrammed to operate a Harman Kardon DVD player when the Video 3 source has been selected, use the source device’s original remote to control other components, or operate an iPod using its own controls.

Docking Station

With the optional The Bridge II docking station, you can listen to audio or view videos stored on your iPod, iPod touch or iPhone (not included), use your HK 3490 remote control to operate the iPod, and even charge the iPod while it’s docked in The Bridge II docking station. Simply plug the proprietary cable from The Bridge II unit into the special connector on the rear of the HK 3490. See Figure 20. Refer to the owner’s manual for The Bridge II model for more information.

HK 3490

Figure 20 – The Bridge II Connection

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Page Safety Information Important Safety InstructionsImportant Safety Information Page Table of Contents Introduction FRONT-PANEL Controls FM Mode DSP Mode Power REAR-PANEL Connections DVD REAR-PANEL Connections Remote Control Functions Tape Controls CD recorders CD Controls CD playersXM Controls the HK 3490 and its internal tuner only Been selectedFM Mode Remote Control Functions Connecting Source Devices to the HK ConnectionsSpeaker Connections SubwooferAntennas Audio ConnectionsVideo Connections Digital AudioSpeaker Placement Speaker PlacementInstallation Step One Connect the SpeakersStep Two Connect the Subwoofer Step Three Connect the AntennasPhono Turntable TapeVideo 1 Source Compact Disc CD PlayerDocking Station Video 2 SourceVideo 3 Source Step Eight Plug In AC Power Step Five Connect the Video DisplayStep Six Connect the Remote IR Input and Output Optional Step Seven Connect Optional External EquipmentFront-Panel Power Switch Step Ten Turn On the HKOperation Source Selection HeadphonesSpeaker 1/2 Using the Tuner AM, FM and XM Modes Press the AM, FM or XM Button on the remoteAuto Preset FM Only Using Docking StationUsing the XM Radio Tuner Using The BridgeProcessor Reset Unit will return to Standby mode, and you may power it onDim Function MemoryTroubleshooting Guide HK 3490 Technical Specifications NTSC/PAL/SECAMTable A2 Subwoofer Trigger Output Operation Table A1 Remote Control Device TypesAppendix Table A3 Remote Control Function List VID

HK3490 specifications

The Harman-Kardon HK3490 is an exceptional stereo receiver that combines power, versatility, and timeless design to cater to audiophiles and casual listeners alike. Known for its impressive sound quality, the HK3490 is a solid choice for anyone looking to enhance their home audio experience.

One of the standout features of the Harman-Kardon HK3490 is its powerful amplification. With a 120 watts per channel output, this receiver is capable of driving even demanding speakers with ease. Whether you're enjoying a quiet evening at home or hosting a lively gathering, the HK3490 delivers clean, dynamic sound that fills any room. The unit is equipped with an advanced high-current, low-impedance design, ensuring robust performance across a wide range of speakers.

In terms of connectivity, the HK3490 is equipped with an array of options. It offers multiple audio inputs, including six stereo line inputs, a dedicated phono input for vinyl enthusiasts, and a 2-channel tape monitor, allowing users to connect various audio sources seamlessly. The receiver also features a built-in AM/FM tuner with 30 presets, making it easy to enjoy your favorite radio stations.

The HK3490 further incorporates sophisticated technologies designed to enhance sound quality. Harman-Kardon's proprietary technologies, such as the Logic 7 processing, provide a rich, immersive audio experience that preserves the integrity of the original recording. This technology ensures that stereo signals are transformed into a surround sound experience, making your music, movies, or games more engaging.

Another important aspect of the HK3490 is its aesthetic appeal. The receiver features a sleek, classic design with a brushed aluminum front panel complemented by a large, easy-to-read display. The intuitive layout of knobs and dials makes it user-friendly, allowing for easy adjustments to volume and tuning.

Moreover, the HK3490 is designed with durability in mind. Its robust construction ensures that it can handle the rigors of daily use, while its thermal protection circuits prevent overheating, allowing for reliable performance over extended periods.

In summary, the Harman-Kardon HK3490 is a versatile, high-performance stereo receiver that caters to a wide range of audio needs. With its powerful amplification, extensive connectivity options, and advanced sound technologies, it stands out as a premium choice for anyone looking to elevate their listening experience. Whether you are a seasoned audiophile or simply enjoy quality sound, the HK3490 is a worthy addition to any audio setup.
Top Page Image Contents