Harman-Kardon AVR 125 owner manual Front Left, Front Right Red Center

Page 10

REAR-PANEL CONNECTIONS

¤Switched AC Accessory Outlet: This outlet may be used to power any device you wish to have turned on or off at the same time as the AVR 125. Any device connected to this outlet will be off when the AVR 125 is in the Standby mode, and power will be supplied to the outlet when the AVR 125 is turned on.

Unswitched AC Accessory Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regardless of whether the AVR 125 is on or off.

IMPORTANT NOTE: The total power consumption of all devices connected to the accessory outlets should not exceed 100 watts. Do not connect power amplifiers or other high-current draw devices to these outlets.

AC Power Cord: Connect the AC plug to an unswitched AC wall outlet.

Optical Digital Output: Connect this jack to the matching digital audio input connector on a digital recorder such as a CD-R or MiniDisc recorder.

Coaxial Digital Output: Connect this jack to the matching digital audio input connector on a digital recorder such as a CD-R or MiniDisc recorder.

‡f Video Monitor Outputs: Connect these jacks to the composite or S-Video input of a TV monitor or video projector to view the output of any standard video source selected by the receiver’s video switcher.

°g DVD Video Inputs: Connect one of these jacks to the composite or S-Video output jacks on a DVD or other video source.

·Coaxial Digital Inputs: Connect the coax digital audio output from a DVD player, HDTV receiver, LD player, satellite receiver, cable box, MiniDisc recorder or CD player to these jacks. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to these jacks.

ai Video 1 Video Inputs: Connect one of these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source.

bk Video 1 Video Outputs: Connect one of these jacks to the RECORD/INPUT composite or S-Video jack on a VCR.

cOptical Digital Inputs: Connect the optical digital audio output from a DVD player, HDTV receiver, LD player, satellite receiver, cable box, MiniDisc player or recorder, or CD player to these jacks. The signal may be either a Dolby Digital signal, a DTS signal or a standard PCM digital source.

d32 Video 2 Video Inputs: Connect one of these jacks to the PLAY/OUT composite or S-Video jacks on a TV, VCR or other video source.

e6-Channel Direct Inputs: If an external digital audio decoder is used, connect the outputs of that decoder to these jacks.

These jacks have been color-coded as follows to assist you in making correct channel connections:

Front Left

White

Front Right

Red

Center

Green

Surround Left

Blue

Surround Right

Gray

Subwoofer

Purple

hDVD Audio Inputs: Connect these jacks to the analog audio jacks on a DVD player or other source device.

NOTE: The default setting for the audio input associated with DVD is the Coaxial Digital Input 1 ·. If you connect the audio outputs of a DVD player to the ana- log jacks h, change the input setting as shown on page 20.

jVideo 1 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source.

31Video 1 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR.

33Video 2 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR, satellite receiver, cable box, video game or other composite video source.

10 REAR-PANEL CONNECTIONS

Image 10
Contents AVR AUDIO/VIDEO ReceiverAVR 125 AUDIO/VIDEO Receiver For Canada IntroductionPour le Canada To the UserImportant Safety Information Safety InformationUnpacking Set Button FRONT-PANEL Controls# Digital Optical 3 Input $ Digital Coax 3 Input Channel Select Button Press this button to Bitstream Indicators When the input is a digital FRONT-PANEL Information DisplayFRONT-PANEL Information Display REAR-PANEL Connections ‡ Video Monitor S-Video OutputFront Right Red Center Front LeftSurround Left Blue Surround Right Gray Subwoofer AVR Selector Remote Control FunctionsPower Off Button AM/FM Tuner Select h Test ButtonAVR mode OFFDelay/Prev Ch. Press this button to begin Front Left = White Installation and ConnectionsConnect the analog output of a CD player to the CD Inputs £ Center = GreenConnect the analog audio and video outputs Video Connection NoteVideo inputs may only be viewed when System Configuration Speaker PlacementWhen C Large is selected, a full-range output Press the Set Button oStereo-Direct Bypass Mode Configuring the Surround Off Stereo ModesOutput Level Adjustment Proper directionality and intensityTo set the delay times, follow these steps Press the Digital Button p To enter the setting into the units memoryPress the the Set Button o Repeat the process for each of the inputsBasic Operation Volume ControlOperation Source SelectionMode Features Delay Time Range Surround Mode ChartDTS Digital Audio Playback Surround Mode SelectionSelecting a Digital Source Important Notes on Digital Playback Tuner Operation Output Level Trim AdjustmentTape Recording Channel Direct Input Memory BackupStereo-Digital Surround Off mode, only Programming the Remote Programming the RemoteDVD CD VID1/VCR VID2/TV VID3/CBL/SAT VID Tape Punch-Through Programming Erasing Macro CommandsProgram Indicator c will flash amber Press the AVR Selector fResetting the Remote Memory 125 Function List PPV Setup Code Table TV 123 148 145 148128 132 145 148 115 123 128 160 167 168Setup Code Table TV/VCR Setup Code Table VCRMGA MarantzMemorex MitsubishiSetup Code Table CD Setup Code Table CD/DVD Setup Code Table DVDSetup Code Table SAT Setup Code Table TAPE/CBL Setup Code Table CBLSignature RembrantSeam SprucerSymptom Cause Solution Troubleshooting GuideProcessor Reset Lights, motors or other electrical appliancesTechnical Specifications NtscHarman Kardon, Incorporated Part No. CQX1A778Z Page AVR 125 QUICK-START Guide How to Use the Binding-Post Speaker Terminal Speaker and Video Connections Video Connections