Harman-Kardon AVR 240 owner manual System Configuration

Page 29

System Configuration

Once the settings outlined on the previous pages have been made, the AVR is ready for operation. While there are some additional settings to be made, these are best done after you have had an opportunity to listen to a variety of sources and different kinds of program material. These advanced settings are described on pages 37 to 38 of this manual. In addition, any of the settings made in the initial configuration of the unit may be changed at any time. As you add new or different sources or speakers, or if you wish to change a setting to better reflect your listening taste, simply follow the instructions for changing the settings for that parameter as shown in this section.

Note that any settings changed at any time, also when the discrete buttons are used only, will be stored in memory in the AVR, also if it´s turned off completely, unless it will be reset (see page 46).

Having completed the setup and configuration process for your AVR, you are about to experience the finest in music and home- theater listening. Enjoy!

SYSTEM CONFIGURATION 29

Image 29

Contents AVR 240 Audio/Video Receiver Declaration of Conformity Table of ContentsIntroduction Description and FeaturesVariety of modes and two modes of VMAx Front panel analog A/V inputsUnpacking Safety InformationImportant Safety Information Front Panel Controls Headphone Jack $ Speaker/Channel Input IndicatorSee page 26 for more information on the Channel Indicators # Preset Stations Selector Press thisDigital Input Selector When playing a More information on digital audioRear Panel Connections Digital Audio Outputs Connect these Unswitched OutletDigital recorder such as a CD-R or MiniDisc recorder + and negative terminalsSpare Button Main Remote Control Functions› Button Speaker Select Mute Volume Up/Down See page 35 for more information Channel/8 Channel Direct InputOptional is connected to Digital Media Player DMPVideo Equipment Connections Installation and ConnectionsAudio Equipment Connections Scart A/V Connections Main Room Remote Control Extension System and Power ConnectionsAC Power Connections Watts, that to the Switched OutletSpeaker Selection Speaker PlacementUsing the On-Screen Display System ConfigurationSystem Setup First Turn OnNavigation Button Input SetupSurround Setup Audio SetupDigital audio stream stops Cursor is next to the line readingTo take advantage of this feature, press Night Mode SettingsAutomated Speaker Setup Using EzSet+ Configuring the Surround Off Stereo ModesStereo-Direct Bypass Mode Stereo-Digital ModeNavigation Buttons E Navigation Buttons E so thatSo that Stop Appears and press the Set Button FSpeaker X-OVER line on the menu screen Manual SetupSpeaker Setup Screen menu That option press the ‹ / › Buttons EWithin five seconds, either press the ‹/› buttons Press the ‹ / › Navigation Button E to Delay SettingsFor all active speaker positions by pressing Output Level Adjustment Is then pressed to select OFF in the highlighted video Volume until you can hear the test noise clearlyWhen all channels have the same output level System Configuration Channel Surround Mode ChartOperation Reference Dolby 3 StereoWide Main speakers and a subwooferBasic Operation Controls and Use of HeadphonesSource Selection Channel/8-Channel Direct InputDigital Audio Playback Surround Mode SelectionUntil Surr OFF appears in the Main Information Display Ò Dolby DigitalDigital Bitstream Indicators Surround Mode TypesRear panel Or front panel *Ó PCM Audio PlaybackSee Figure Speaker/Channel IndicatorsPCM Playback Indications Output Level Adjustment With Source Signals UsingNight Mode Tape RecordingFront-Panel-Display Fade Memory BackupTo change the output level Cursor next to the desired item, or placeTurn On Volume Level Advanced FeaturesSemi-OSD Settings Full-OSD Time Out AdjustmentTuner Operation Default Surround ModeFull-OSD Background Color Basic Tuner OperationRDS Operation RDS TuningRDS Display Options Program Search PTYProgramming the Remote with Codes Programming the RemoteCode Readout Direct Code EntryProgrammed Device Functions Volume Punch-ThroughMacro Programming Channel Control Punch-Through Resetting the Remote MemoryMute button By the AVR Input SelectorAM/FM Function ListAVR DVD Processor Reset Troubleshooting GuidePower Switch 1 is pushed Remote sensor Ú is obscuredTechnical Specifications Appendix Settings Worksheet Introduction Harman Consumer Group International

Related manuals

Manual 4 pages 52.83 Kb