Operation
Basic Operation
Once you have completed the setup and configu- ration of the AVR, it is simple to operate and enjoy. The following instructions should be followed for you to maximize your enjoyment of your new receiver:
Turning the AVR On or Off
•When using the AVR for the first time, you must press the Main Power Switch 1 on the front panel to turn the unit on. This places the unit in a Standby mode, as indicated by the amber color of the Power Indicator 3. Once the unit is in Standby, you may begin a listening session by pressing the System Power Control 2 or the Source button % on the front panel or the AVR Selector 5. Note that the Power Indicator 3 will turn blue. This will turn the unit on and return it to the input source that was last used. The unit may also be turned on from Standby by pressing any of the Source Selector buttons on the remote 4567 or the Source button % on the front panel.
NOTE: After pressing one of the Input Selector buttons 4 (except VID3) to turn the unit on, press the AVR Selector 5 to have the remote control the AVR functions.
To turn the unit off at the end of a listening ses- sion, simply press the System Power Control
2on the front panel or the Power Off Button 3 on the remote. Power will be shut off to any equipment plugged into the rear panel Switched AC Outlets and the Power Indicator 3 will turn orange.
When the remote is used to turn the unit “off” it is actually placing the system in a Standby mode, as indicated by the orange color of the Power Indicator 3.
When you will be away from home for an extend- ed period of time it is always a good idea to com- pletely turn the unit off with the front panel Main Power Switch 1.
NOTE: All preset memories may be lost if the unit is left turned off with the Main Power Switch
1for more than two weeks.
Using the Sleep Timer
•To program the AVR for automatic
The sleep time will be displayed in the Main Information Display Ò and it will count down until the time has elapsed.
When the programmed sleep time has elapsed, the unit will automatically turn off (to Standby mode). Note that the front panel display will dim to one half brightness when the Sleep function is programmed. To cancel the Sleep function, press and hold the Sleep Button 9 until the infor- mation display returns to normal brightness and the Sleep indicator numbers disappear and the words SLEEP OFF appear in the Main Information Display Ò.
Source Selection
•To select a source, press any of the Source Selector buttons on the remote 46 7 .
NOTE: After pressing one of the Input Selector buttons 4 to turn the unit on, press the
AVR Selector 5 to have the remote control the AVR functions.
•The input source may also be changed by press- ing the
•As the input is changed, the AVR will auto- matically switch to the digital input (if selected), surround mode and speaker configuration that were entered during the configuration process for that source.
•The
•As the input source is changed, the new input name will appear momentarily as an
The input name will also appear in the Main Information Display Ò and a blue LED will light next to the selected input’s name in the
•When a pure audio input (CD, Tuner, Tape,
6/8 Channel Input) is selected, the last video input used remains routed to the Video Outputs
and Video Monitor Output . This per- mits simultaneous viewing and listening to differ- ent sources.
•When 
Digital Media Player (DMP) source is selected, if a compatible Apple iPod device is inserted in an optional Harman Kardon 
that is connected to 
DMP Connector on the rear panel, function mes- sages will appear on any video display connected
to the AVR’s Video Monitor Outputs , and the remote control may be used to navigate the iPod and access many of its functions. The func- tion messages will also appear in the
See the owner’s guides for |
| and your |
iPod for more information. |
|
|
•When a Video source is selected, its audio signal will be fed to the speakers and the video signal for that input will be routed to the appropriate
Monitor Output Jack and will be viewable on a TV monitor connected to the AVR. If a component video source is connected to the Video 1 or Video 2 Component Inputs, it will be rout- ed to the Component Video Outputs . Make certain that your TV is set to the proper input to view the appropriate video signal (composite, S- Video or component video, see Notes for
6-Channel/8-Channel Direct Input
•There are two input choices available for use with sources such as a
•The 6 CH DIRECT INPUT should be used when the SBR and SBL inputs are NOT in use and the input source device has its own inter- nal bass management system. This input passes the input from the source directly through to the volume control without any analog to digital con- version and it mutes the unused input jacks to prevent unwanted noise from interfering with sys- tem performance.
•The 8 CH DIRECT INPUT should be used when an input is connected to all eight
8-Channel Direct Inputs and when the
input source device has its own internal bass management system. This input passes the input from the source directly through to the volume control without any analog to digital conversion and it mutes the unused input jacks to prevent unwanted noise from interfering with system performance.
Note that when the
Controls and Use of Headphones
•Adjust the volume to a comfortable level using the front panel Volume Control ı or remote
Volume Up/Down | buttons. |
• To temporarily silence all speaker outputs press
the Mute button . This will interrupt the out- put to all speakers and the headphone jack, but it will not affect any recording or dubbing that may be in progress. When the system is muted, the word MUTE will blink in the Main Infor- mation Display Ò. Press the Mute button
again to return to normal operation.
32OPERATION