S - J Series Pump
OWNER'S MANUAL
Before Installation be sure to read all the instructions and warnings carefully. Refer to the product data plates for additional operating instruction and specifications.
INSPECTION
Examine the equipment when received. Notify your dealer or carrier of any damage or missing parts. Verify that the equipment is of size and model specified.
READ AND FOLLOW SAFETY INSTRUCTIONS
This is the safety alert symbol. When you see this symbol on your pump or in this manual, look
for one of the following signal words and be alert to the potential for personal injury:
D A N G E R warns about hazards that will cause serious personal injury, death or major property damage if ignored.
W A R N I N G warns about hazards that can cause serious personal injury, death or major property damage if ignored.
C A U T I O N warns about hazards that will or can cause minor personal injury or major property damage if ignored.
The label NOTICE indicates special instructions, which are important but not related to hazards.
WA R N I N G
Hazardous voltage. Can shock, burn, or cause death.
Ground pump before connecting to power supply. Disconnect power before working on pump, motor
or tank.
Carefully read and follow all safety instructions in this manual and on pump.
Keep safety labels in good condition.
Replace missing or damaged safety labels.
Wire motor for correct voltage. See “Electrical”
section of this manual and motor nameplate.
Ground motor before connecting to power supply.
Meet National Electrical Code, Canadian Electrical Code, and local codes for all wiring.
Follow wiring instructions in this manual when connecting motor to power lines.
INSTALLATION LOCATION
All S & J Series pumps are designed for flooded suction (all suction fittings and suction piping are below water level) and will not