Graco 3A0019J important safety instructions Series Chemical Pumps, Important Safety Instructions

Page 1

Instructions-Parts

Z-Series

 

Chemical Pumps

EN

 

3A0019J

 

 

For pumping plural component materials. For professional use only.

Not for use in explosive atmospheres.

3500 psi (24 MPa, 241 bar) Maximum Working Pressure

Important Safety Instructions

Read all warnings and instructions in this manual and all supplied manuals. Save all instructions.

See page 2 for model information.

r_257891_3a0019_1h

Image 1
Contents Series Chemical Pumps Important Safety InstructionsModels ContentsFire and Explosion Hazard Moving Parts Hazard Material Self-ignition Isocyanate ConditionsMoisture Sensitivity of Isocyanates Keep Components a and B SeparateComponent Identification Outlet Housing D40cc pump shown Flushing Pressure Relief ProcedureRequired Tools RepairPump Disassembly Remove throat retainer 16 or 17 or 5cc, 10cc, and 15cc pumps 60cc-160cc pumps Pump AssemblyR2578913a001915h Pump Size Torque 5cc, 10cc, and 15cc Pumps Parts20cc, 25cc, 30cc, 40cc, and 50cc Pumps 60cc, 65cc, 75cc, 80cc, 86cc, 100cc, 120cc, and 160cc Pumps Part Description Qty Pump PartsCylinder Kits Cylinder O-ring KitsCrossover Tube Kits Throat Retainer Kits Throat Cartridge KitsPiston Retainer Kits Seal Kits Displacement Rod Kits Throat Spacer Kits Displacement Rod KitsLength Inlet Outlet Dimensions150 mm Outlet Housing Mounting Hole LayoutTechnical Data Graco Information Graco Standard Warranty