Graco 205148 important safety instructions Air and Transfer Lines FIG, Install the Pump, Key

Page 4

Installation

Air and Transfer Lines (FIG. 2)

The typical installation shown in FIG. 2 is only provided as a guide for selecting and installing required and optional accessories. Be sure all air and fluid accessories are properly sized for your system and are compatible with the fluid you are pumping. Contact your Graco representative for assistance in designing a transfer system to suit your spe- cific needs.

Air inlet 3/4 npsm(f)

swivel

F

2” npt outlet

CA

E DB

Key:

AAir Line Filter

BAir Regulator

CAir Runaway Valve

DAir Line Oiler

EBleed-type Master Air Valve

FOutlet Hose

ti0551a

FIG. 2

•3/4 in. ID Air Supply Line

•3/4 npt(f) Air Inlet Swivel

•On the Air Supply Line install:

•Air Filter (A) to remove harmful dirt and mois- ture from the compressed air supply

•Air Regulator (B) to control pump speed

•Air Runaway Valve (C) to stop the pump auto- matically if the supply container is empty.

•Air Line Oiler (D) for automatic air motor lubri- cation

•Bleed-type master air valve (E): required in your system to relieve air trapped between it and the air motor when the valve is closed.

Never operate this pump with the bleed-type master air valve (E) (supplied with the air motor) removed. When closed, this valve relieves air trapped between it and the air motor. Trapped air can cause the pump to cycle unexpectedly and cause serious bodily injury from moving parts.

•Install Transfer Hose (F) to the 2 in. npt(f) pump outlet and tighten securely.

For air requirements and additional Technical Data see page 10.

Install the Pump

1.Remove cover from a full, open head drum of lubri- cant.

2.To help eliminate air pockets, which is essential for good priming, smooth surface of the lubricant with a straight edge until it is level.

3.Lift pump from the inductor plate and wipe bottom of plate clean.

4.Press inductor plate down onto the lubricant. Rock plate back and forth to firmly seat it and to exhaust air trapped under the plate. Continue with this motion until some lubricant is forced up into the neck of the inductor plate.

5.Place pump on the inductor plate.

4

306642F

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Model Model 205148, Series EElectric Shock Hazard Installation GroundingAir and Transfer Lines FIG Install the PumpKey Pressure Relief Procedure OperationStartup Clearing ObstructionsTroubleshooting Problem Cause SolutionRepair Throat Packing Repair FIGPump Intake Repair FIG Parts Part No. Description QtyTechnical Data 306642F Graco Warranty and Disclaimers WarrantyEquipment Not Covered by Graco Warranty Disclaimers and Limitations

205148 specifications

The Graco 205148 is a high-performance airless paint sprayer designed for both professionals and DIY enthusiasts seeking efficiency and quality in their painting projects. This model is particularly well-known for its robust construction, user-friendly features, and versatility, making it suitable for a variety of applications including interior and exterior painting, staining, and sealing.

One of the standout features of the Graco 205148 is its powerful motor that delivers a high output of paint, enabling users to cover large areas quickly and evenly. The sprayer is capable of handling various coatings, including thicker materials, thanks to its adjustable pressure settings. Users can easily modify the pressure to accommodate different types of paint, ensuring optimal flow and finish quality.

In addition to its power, the Graco 205148 incorporates advanced technologies designed for ease of use and efficiency. The ProConnect feature allows users to quickly and easily change out the pump, minimizing downtime during projects. This means that if a pump is clogged or needs replacement, the user can swap it out in just a few steps, allowing the painting task to continue uninterrupted.

Another notable characteristic is its TrueAirless spray tip technology. This feature eliminates the need for thinning paint, which not only saves time but also ensures a consistent spray pattern without compromising the integrity of the paint. The sprayer is equipped with a reversible spray tip that allows users to quickly clear clogs by simply reversing the tip, thus enhancing productivity on the job.

Portability is another significant aspect of the Graco 205148. Its compact design and light weight make it easy to transport from one location to another. The integrated stand ensures stability during operation and storage, preventing the unit from tipping over when not in use.

Durability is a key selling point as well, with the Graco 205148 constructed from high-quality materials designed to withstand the rigors of both residential and commercial use. The easy-to-clean design further adds to its appeal, allowing users to maintain the sprayer with minimal effort, thus prolonging its lifespan.

In conclusion, the Graco 205148 is a highly efficient airless paint sprayer that combines power, portability, and user-friendly features. Its advanced technologies and robust construction make it an outstanding choice for anyone looking to achieve professional-quality results in painting projects. Whether you’re a contractor or a weekend warrior, the Graco 205148 promises to deliver exceptional performance and reliability.
Top Page Image Contents