Harbor Freight Tools 92038 operating instructions Grounding

Page 5

7.Make sure the Oil Tank (13) is completely filled with a high quality hydraulic oil prior to use.

8.This Pump should be mounted in a properly vented area at least 18 inches above the floor.

WARNING!! Allow 2 seconds between motor starts. Failure to comply may burn out the motor.

9.Always unplug the Pump from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

10. WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.

GROUNDING

WARNING!

The Power Cord requires the attachment of a 220 volt, grounded, 3-Prong Plug (not included). For safety purposes, only a qualified, certified, electrician should attach a Plug to the Power Cord. Never modify the Plug in any way. To comply with the National Electric Code, and to provide additional protection from the risk of electrical shock, this product should only be connected to a 220 volt electrical outlet that is protected by a Ground Fault Circuit Interrupter (GFCI).

SKU 92038 For technical questions, please call 1-800-444-3353.

Page 5

Image 5
Contents VOLT, HYDRAULIC, Electric Pump For technical questions and replacement parts, please callGeneral Safety Rules Product SpecificationsSave this Manual Work AreaTool USE and Care Electrical SafetyPersonal Safety Service Specific Safety RulesGrounding See Figure C, next Extension CordsSee Figure C Extension Cord LengthUnpacking SymbologyAssembly and Operating Instructions Operation Mounting the PumpAttaching Hydraulic Hoses Do not use damaged equipment INSPECTION, MAINTENANCE, and CleaningPlease Read the Following Carefully Parts ListAssembly Diagram