2. For Your Safety
GB
In Austria
In Switzerland
Mains power
Visual check
Manual operation
According to DIN VDE (German Electrical Engineers’ Associa- tion) 0100, dirty water pumps may only be used in swimming pools, garden ponds, and fountains if the pump is operated via a
For safety reasons we recommend that you always operate
the pump via a
vPlease contact your electrician.
In Austria, according to ÖVE B/EN 60 555 part 1 to 3, pumps which are used in swimming pools and garden ponds, and equipped with firm power cable should be fed via an ÖVE approved isolating transformer – rated voltage must not exceed 230 V.
In Switzerland mobile appliances which are used outdoors, must be connected via a
According to DIN VDE (German Electrical Engineers’ Associa- tion) 0620, mains power cables must not have a smaller cross- section than the
Data indicated on the type plate must match technical data of the mains supply.
vTake care that the electrical connections are made within dry area, protected from flooding.
Protect plug and power cable from heat, oil and sharp edges.
vDon’t use the power cable for plugging off.
The power cable or the float switch must not be used for mount- ing or relocating the pump. For submerging or lifting/securing the pump, fix a rope to the pump’s carrying handle.
vBefore operating the pump, first make a visual check, if there is any damage of the pump (esp. regarding power cable and plug).
vObserve the minimum water level and the max. delivery height (see 8. Technical Data).
A damaged pump must not be used.
vIn case of damage, please have the pump checked by our GARDENA Service Centre.
During manual operation, the pump must be switched off as soon as all the liquid has been pumped away.
vObserve the pump at all times during manual operation.
12