Harman-Kardon AVR80 owner manual External Audio Power Amplifier Connections, AC Power Connections

Page 18

AVR80 manual 11/01/98 13:01 Side 12

ENGLISH

Installation, Set Up & Configuration

12

External Audio Power Amplifier Connections

Using the PRE OUT jacks –, connections may be made to external power amplifiers. To make these connections, remove the jumpers between PRE-OUTand MAIN IN, and save them for future use. Connect the PRE- OUT of the channels to be connected to external amplifiers to that amplifier’s inputs. Volume will still be controlled by this receiver.

When an external amplifier is used for the front channels, this receiver’s rear channel outputs and one passive (non- powered) subwoofer may be connected to this unit’s internal amplifier for higher power output. To make these connections, follow the diagrams on this page. Using short RCA to RCA jumpers, connect the left and right SURR PRE- OUT jacks to the left and right FRONT MAIN IN jacks. A subwoofer may be connected by connecting the

SUBWOOFER PRE OUT to the

CENTER MAIN IN.

If these connections are used, changes must be made to the speaker outputs. Connect the left and right surround speakers to the speaker terminals labeled FRONT ú”and the passive subwoofer to the speaker terminals labeled

CENTER Æ.

NOTE: When external power amplifiers are used, the center channel speakers should receive at least as much amplifier power as the front left and right speakers.

AC Power Connections

This unit is equipped with two accessory AC outlets. They may be used to power accessory devices, but they should not be used with high current draw equipment such as power amplifiers (not more than 50 Watts each).

The SWITCHED outlet will receive power only when the unit is on. This is recommended for devices that have no power switch, or a mechanical power switch that may be left in the “ON” position (as for example with the harman/kardon CDPlayer HD730). Devices with electronical power switch may only switch on to standby mode, if pluged in here.

The UNSWITCHED Ÿoutlet will receive power as long as the unit is plugged into a powered AC outlet.

Finally, when all connections are complete, plug the power cord into a non-switched AC wall outlet. Note that the ring surrounding the Power Switch

(will turn amber. You’re almost ready to enjoy the AVR80!

External

Power Amplifier

 

L

R

CENTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAIN IN

PRE OUT

L

FRONT

R

L

SURR.

R

CENTER

SUB

WOOFER

Subwoofer

 

+

–

 

CENTER

 

 

8OHMS

 

Right Surround

Left Surround

Speaker

Speaker

 

SURR.

 

 

8OHMS

 

+

–

–

+

 

 

FRONT

 

 

 

8OHMS

 

RL

SPEAKERS

Use these connections when the AVR80’s internal amplifiers are re-configured from their factory settings

Page 17 Page 19
Image 18
Page 17 Page 19
Contents AVR80 AVR80 manual 11/01/98 1301 Side Front Panel Information DisplayRear Panel Audio and System Connections Rear Panel Video ConnectionsRemote Control AUXTable of Contents Description and Features IntroductionTwin DSP processors for precise surround decoding Safety Information Important Safety InformationImportant Fuse Plug Information Unpacking and InstallationHow to Connect a Plug ConventionsFront Panel Controls Front Panel Information Display Rear Panel Audio and System Connections Rear Panel Video Connections Remote Control Functions Remote Control Functions Audio Input and Output Connections Installation, Set Up & ConfigurationSystem Installation Connect an FM antenna toSystem and Power Connections Remote Control ExpansionVideo Input Output Connections External Audio Power Amplifier Connections AC Power ConnectionsWill turn amber. You’re almost ready to enjoy the AVR80 Remote Control Programming & Operation Remote ProgrammingSwitch to the Use position when you are finished Continue to program any additionalSystem Configuration Speaker PlacementSystem Settings Figure #1Press the Ü or Ý buttons qto choose one of these options OFF Choose this option if no Subwoofer is presentSelect on the remote, to resume the setup Basic Operation Volume ControlSurround Mode Selection Source SelectionTV Auto Function Tuner ModeTuner Presets Tuner OperationStation Name Preset Automatic Station Preset SelectionManual Tuner Preset Tune to the desired preset stationClearing Preset Stations Tuning Preset StationsWhen the desired station is reached press P-SCAN%or Clear ó To move the display in reversePTY Auto Search Programme Service DisplayRDS Operation SecondsRDS Programme Type PTY Groups On Screen Menus Surround Mode and DelayOn Screen Display Status screen displays the following informationInput Selection Master VolumeUsing The On Screen Menus for System Control Surround Output LevelsT U R N M a I N M E N U R R O U N D M O D E Advanced Features Audio Tape CopyVideo Copy Delay Time Adjust Direct Digital DecodingDigital output Advanced Features Surround Mode Chart IR Link InstallationMultiroom Operation Audio LinkOperation AVR80 is now configured for multi room operationIf the remote room is equipped Main Room OperationMultiroom Operation Remote Room OperationMemory Backup TroubleshootingTroubleshooting Chart System ResetTechnical Specifications

AVR80 specifications

The Harman-Kardon AVR80 is a distinguished audio-video receiver that stands out for its combination of high-fidelity sound and thoughtful design, making it a noteworthy addition to any home theater system. Designed to deliver a captivating audio experience, the AVR80 is known for its robust build and a range of features that cater to both audiophiles and casual listeners.

One of the main attractions of the AVR80 is its powerful amplification capabilities. With a multi-channel configuration, it provides ample power to drive various speaker setups, ensuring clear, dynamic audio playback. The receiver supports multiple surround sound formats, including Dolby Digital and DTS, allowing for an immersive listening experience that truly brings movies, music, and gaming to life. This versatility makes the AVR80 a perfect choice for those who desire exceptional sound quality across different media.

The AVR80 incorporates advanced digital signal processing technologies, enabling it to refine audio output and enhance performance. Its onboard processing technologies are designed to optimize sound for both music and film, ensuring that every nuance is heard. Additionally, the receiver features various equalization options that allow users to tailor sound to the specific characteristics of their room.

Connectivity is another standout feature of the Harman-Kardon AVR80. It comes equipped with multiple HDMI inputs and outputs, allowing for seamless integration with modern AV sources such as Blu-ray players, gaming consoles, and streaming devices. This makes it easy to manage multiple devices with just one receiver, minimizing cable clutter. Furthermore, the AVR80 supports 4K video pass-through, ensuring that you can enjoy high-resolution content without compromising quality.

The user interface of the AVR80 is intuitive, providing an enjoyable setup process and user experience. The front-panel display allows easy navigation through various settings and options, while the remote control offers convenience for adjusting parameters without getting up.

In terms of design, the AVR80 features a sleek, modern aesthetic that can blend well with a variety of home decors. The sturdy construction reflects Harman-Kardon's commitment to quality, ensuring longevity and reliability.

In summary, the Harman-Kardon AVR80 is a powerful and versatile AV receiver that excels in delivering high-quality audio and video performance. Its combination of robust amplification, advanced processing technologies, and excellent connectivity options make it an ideal choice for those seeking a well-rounded home theater experience. Whether you’re watching a blockbuster film or enjoying your favorite music, the AVR80 ensures that every moment is enhanced by superior sound quality.
Top Page Image Contents