Harbor Freight Tools 68476 specifications HP Submersible Sump Pump with Vertical Float Switch

Page 1

1/3 HP Submersible Sump Pump with Vertical Float Switch

Item 68476 Specifications

Float Switch Operation Height

7.1 IN. ON / 2.8 IN. OFF

Electrical Requirements

120V~ / 60Hz / 7.6A

Power Cord Length

10 FT.

Maximum Capacity

3000 GPH

Maximum Delivery Height

25 FT.

Discharge Size

1.5 IN. NPT

(includes 1.25 IN. Adaptor)

 

Maximum Water Temperature

77° F (25°C)

252728

 

Read the separate Sump Pump Safety Warnings, Installation and Operation Instructions before using this product.

Failure to do so can result in serious injury.

SAVE THIS SPECIFICATION SHEET AND THE SUMP PUMP SAFETY WARNINGS, INSTALLATION AND OPERATION INSTRUCTIONS FOR FUTURE REFERENCE.

When unpacking, make sure that the product is intact and undamaged.

If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.

Visit our website at: http://www.harborfreight.com

Copyright© 2011 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape

or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

Image 1
Contents Item 68476 Specifications HP Submersible Sump Pump with Vertical Float SwitchPlease Read the Following Carefully Parts List and Assembly DiagramSump Pump Safety Warnings, Installation Operation InstructionsBefore start-up, note the following Power SupplyFluid Type Please noteAreas of use Installation InstructionsOperation GFCI-Protected Receptacle Pump Cord Float SwitchMaintenance Quarterly MaintenanceParts List and Diagram Cold Weather StorageDisconnect power cords immediately TroubleshootingMission Oaks Blvd. PO Box 6009 Camarillo, CA 91302 800 Limited 90 DAY Warranty