Hitachi 1800 important safety instructions Moving Parts Hazard

Page 7

Warnings

WARNING

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers and other body parts.

Keep clear of moving parts.

Do not operate equipment with protective guards or covers removed.

Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure in this manual. Disconnect power or air supply.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

Always wear impervious gloves when spraying or cleaning equipment.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

Protective eyewear

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

311826B

7

Image 7
Contents II 2 G Dura-FloPumpsContents Digit Fourth Digit Fifth Digit ModelsDura-Flo Pumps with NXT Air Motors First P15MSB, a P15LCD, a P15LSB, a UHMWPE/2 Ptfe P15MCD, aLower Model, Packings MPa, bar psi Dura-Flo Pumps with Viscount Hydraulic MotorsFire and Explosion Hazard Moving Parts Hazard Grounding InstallationFlush Before Using Equipment Mounting AccessoriesHydraulic Line Accessories Air Line AccessoriesFluid Line Accessories VA Y Typical Installation, Air-Powered Pumps KeyAY T XLR Typical Installation, Hydraulic-Powered Pumps KeyOperation Pressure Relief ProcedureStartup Bleeder Valve and Wet-Cup ShutdownMaintenance Problem Cause Solution TroubleshootingRequired Tools RepairDisconnect the Lower Reconnect the Lower Reconnect the Lower101 105 106 104 103 108 102 107 Parts101 102 103 104 105 106 107 108 115 116 Wrench Collar AdapterParts 311826B Motor Model Pump Model Kg lb DimensionsNXT Model Mounting Hole LayoutsViscount NXT Model Fluid Outlet Pressure Technical DataPump Air or Hydraulic Oil Consumption Dura-Flo 1800 Pumps with NXT Model 6500 Air Motors Dura-Flo 1800 Pumps with NXT Model 3400 Air MotorsDura-Flo 2400 Pumps with NXT Model 6500 Air Motors Dura-Flo 2400 Pumps with NXT Model 3400 Air MotorsDura-Flo 2400 Pumps with Viscount Hydraulic Motors Dura-Flo 1800 Pumps with Viscount Hydraulic MotorsFluid Outlet Pressure Hydraulic Oil Consumption Graco Information Graco Standard Warranty