Harman-Kardon AVR1550 owner manual On the remote only, not the main volume controls

Page 18

System Configuration

3.The test noise will immediately begin to circu- late in the speakers in a clockwise rotation, pausing at each position for two seconds. As the test noise rotates the speaker positions FL, CEN, FR, SR, SL (Front Left, Center, Front Right, Surround Right, Surround Left) will be shown in the Main Information Display M. As an added assist, while the test noise is circu- lating, the proper channel position will also be indicated in the Speaker/Channel Indicators

Pby a blinking letter within the correct chan- nel. Turn up the volume now until you can hear the noise clearly.

IMPORTANT NOTE: Because this test noise will have a much lower level than normal music, the volume must be lowered after the adjustment for all channels is made, BEFORE you turn the test tone off.

NOTE: This is a good time to verify that the speakers have been properly connected. As the test noise circulates, listen to make certain that the sound comes from the speaker position shown in the Main Information Display. If the sound from a speaker location does NOT match the position indicated in the display, turn the AVR 1550 off using the Main Power Switch

1and check the speaker wiring to make cer- tain that each speaker is connected to the cor- rect output terminal.

After checking for speaker placement, let the test noise circulate again, and listen to see which channels sound louder than the others. Using the front left speaker as a reference, press the ⁄/¤ buttons Con the remote to bring all speakers to the same volume level. Note that when one of the ⁄/¤ buttons is pushed, the test noise circulation will pause on the channel being adjusted to give you time to make the adjustment. When you release the button, the cir- culation will resume after five seconds.

Continue to adjust the individual speakers until they all have the same volume. Note that adjust- ments should be made with the ⁄/¤ buttons

Con the remote only, NOT the main volume controls.

NOTE: The subwoofer output level is not adjustable using the test tone. To change the subwoofer level, follow the steps for Output Level Trim Adjustment on page 23.

When all channels have the same output level, turn the Volume (Idown to about -40dB, otherwise the listening level may be too high as soon as the source’s music starts to play. After- wards press the Test Tone Selector ^7 button again to turn the test tone off and com- plete the process.

IMPORTANT NOTE: The Output level adjust- ment made will be effective for the surround mode currently selected, also when other inputs are selected using the same surround mode. To adjust the output level with all other surround modes used, step through all inputs you´re using by pressing the Source Selector buttons ! on the front panel or the appropriate Input Selectors 4on the remote. When the indica- tor for any surround mode for which the level adjustment has not yet been made lights in the Main Information Display M, repeat the level adjustment described above. This will also allow you to compensate level differences between speakers, that may be different with each surround mode, or to increase or decrease the level of certain speakers intentionally, depending on the surround mode selected.

Once the settings outlined on the previous pages have been made, the AVR 1550 is ready for operation. While there are some additional settings to be made, these are best done after you have had an opportunity to listen to a vari- ety of sources and different kinds of program material. These advanced settings are described on page 23 of this manual. In addition, any of the settings made in the initial configuration of the unit may be changed at any time.

As you add new or different sources or speakers, or if you wish to change a setting to better reflect your listening taste, simply follow the instructions for changing the settings for that parameter as shown above. Note that any set- tings changed at any time, will be stored in memory in the AVR 1550, also if it´s turned off completely, unless it will be reset (see page 27). The settings will either depend on the input (Speaker configuration, analog/digital input selection, surround mode) or on the surround mode selected (speaker output level), as described on previous pages.

Having completed the setup and configuration process for your AVR 1550, you are about to experience the finest in music and home theater listening. Enjoy!

18SYSTEM CONFIGURATION

Page 17 Page 19
Image 18
Page 17 Page 19
Contents AVR 1550 Audio/ Video Receiver Table of Contents Declaration of ConformityDescription and Features IntroductionSafety Information Important Safety InformationUnpacking ÓSet Button ÔDigital Input Selector Delay Front Panel ControlsSelector Buttons Coaxial See page 24 for more information on tuning stationsSee For more information on digital audioAuto Indicator Front Panel Information DisplayRear Panel Connections Video 2 Audio Inputs Front/Center Speaker OutputsFM Antenna Surround Speaker Outputs Power On Button Press this button to turn on the power Remote Control FunctionsDelay See page 26 for a list of these functions That corresponds to the unit you wish to operateSee page 24 for more information Again to operate the AVR’s functions with the remoteHas been pressed See page 24 for more information on RDSInstallation and Connections Audio Equipment ConnectionsVideo Equipment Connections Important Note for Adapter Cables Volume on the TV must be reduced to minimumScart A/V Connections Important Notes for S-Video connectionsSpeaker Placement Speaker SelectionInput Setup System ConfigurationSettings to be Made With Each Input Used Speaker SetupCEN Spkr Surround Setup Delay SettingsNight Mode Settings Output Level AdjustmentOn the remote only, not the main volume controls Basic Operation Controls and Use of HeadphonesOperation Source SelectionSurround Mode Chart Dolby Digital Surround Mode SelectionDigital Audio Playback Coaxial inputs of the AVRSelecting a Digital Source Digital Status IndicatorsNight Mode PCM Audio PlaybackTape Recording Output Level Trim AdjustmentMemory Backup Display BrightnessTuner Operation RDS OperationRemote Program Search PTYFunction List AVRMain Power Switch 1is pushed Troubleshooting GuideProcessor Reset Press the AVR selectorTechnical Specifications Page Harman Consumer International

AVR1550 specifications

The Harman-Kardon AVR1550 is a home theater receiver that has gained recognition for its remarkable blend of modern technology and classic audio performance. This model is designed to deliver a high-quality sound experience, catering to both audiophiles and casual listeners who seek an immersive home entertainment solution.

One of the standout features of the AVR1550 is its powerful amplification, boasting up to 50 watts per channel. This allows users to enjoy rich and dynamic sound across various media, from movies to music. The receiver supports multiple audio formats, including Dolby Digital and DTS, ensuring compatibility with a wide range of movies and gaming experiences. Additionally, it features a 5.1-channel configuration, which provides a complete surround sound experience, enveloping listeners in their favorite content.

The AVR1550 incorporates several advanced technologies that enhance its performance. For instance, it is equipped with a multi-room audio setup, allowing users to enjoy different audio sources in various rooms simultaneously. This feature is particularly advantageous for larger homes where different family members may want to listen to different music or watch different programs.

Another notable characteristic of the AVR1550 is its user-friendly interface. The setup process is straightforward, aided by an on-screen display that guides users through the configuration of speakers and inputs. This accessibility makes it easier for anyone to optimize their home theater system without needing a deep understanding of audio equipment.

Connectivity is another vital aspect of the Harman-Kardon AVR1550. It offers multiple HDMI inputs, enabling users to connect various devices ranging from gaming consoles to Blu-ray players. This versatility ensures that the receiver can seamlessly integrate into any entertainment setup. Additionally, the AVR1550 supports component and composite video connections, making it adaptable for older equipment as well.

The design of the AVR1550 is both elegant and functional. With its sleek lines and minimalist aesthetics, it can fit seamlessly into any home theater setup without being obtrusive. The intuitive front panel controls also allow for easy adjustments on-the-fly.

In conclusion, the Harman-Kardon AVR1550 stands out for its powerful audio performance, advanced features, and elegant design. It remains a solid choice for anyone looking to enhance their home entertainment experience with quality sound and user-friendly technology. Whether for movie nights or music sessions, the AVR1550 delivers a compelling audio performance that caters to a variety of listening needs.
Top Page Image Contents