Harman-Kardon AVR1550 owner manual See page 24 for more information on tuning stations, Coaxial

Page 6

Front Panel Controls

7Surround Mode Selector: Press this but- ton to change the surround mode by scrolling through the list of available modes. Note that Dolby Digital and DTS modes can be selected only when a digital input is used (See page 20 for more information about surround modes.)

8Tuning Selector: Press the left side of the button to tune lower frequency stations and the right side of the button to tune higher frequency stations. When a station with a strong signal is reached, the TUNED indicator Lwill illuminate in the Main Information Display *

(see page 24 for more information on tuning stations).

9Tuner Band Selector: Pressing this button will automatically switch the AVR to the Tuner mode. Pressing it again will switch between the AM and FM frequency bands, holding it pressed for some seconds will switch between stereo and mono receiving and between automatic and manual tuning mode (See page 24 for more information on the tuner).

)Preset Stations Selector: Press this but- ton to scroll up or down through the list of sta- tions that have been entered into the preset memory. (See page 24 for more information on tuner programming.)

!Input Source Selector: Press this button to change the input by scrolling through the list of input sources.

@RDS Select Button: Press this button to dis- play the various messages that are part of the RDS data system of the AVR 1550’s tuner. (See page 24 for more information on RDS).

#Channel Select Button: Press this button to begin the process of trimming the channel output levels using an external audio source. (For more information on output level trim adjustment, see page 23.)

$Speaker Select Button: Press this button to begin the process of selecting the speaker positions that are used in your listening room. (See page 14 for more information on setup and configuration.)

%Video 3 Input Jacks: These audio/video jacks may be used for temporary connection to video games or portable audio/video products such as camcorders and portable audio players.

^Test Tone Selector: Press this button to begin the process of adjusting the channel out- put levels using the internal test tone as a refer- ence. (For more information on output level adjustment, see page 17.)

&Selector Buttons: When you are establish- ing the AVR 1550’s configuration settings, use these buttons to select from the choices available, as shown in the Main Information Display *.

*Main Information Display: This display delivers messages and status indications to help you operate the receiver. (See pages 7–8 for a complete explanation of the Information Display.)

(Volume Control: Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume. If the AVR is muted, adjusting volume control will automatically release the unit from the silenced condition.

ÓSet Button: When making choices during the setup and configuration process, press this button to enter the desired setting as shown in the Main Information Display *into the AVR 1550’s memory. The set button may also be used to change the display brightness.

(See page 23.)

ÔDigital Input Selector: When playing a source that has a digital output, press this

button to select between the Optical

and

Coaxial

Digital inputs. (See pages

 

21-22 for more information on digital audio.)

Delay: Press this button to begin the sequence of steps required to enter delay time settings. (See page 16 for more information on delay times.)

6FRONT PANEL CONTROLS

Page 5 Page 7
Image 6
Page 5 Page 7
Contents AVR 1550 Audio/ Video Receiver Table of Contents Declaration of ConformityDescription and Features IntroductionSafety Information Important Safety InformationUnpacking ÓSet Button ÔDigital Input Selector Delay Front Panel ControlsSelector Buttons Coaxial See page 24 for more information on tuning stationsSee For more information on digital audioAuto Indicator Front Panel Information DisplayRear Panel Connections Video 2 Audio Inputs Front/Center Speaker OutputsFM Antenna Surround Speaker Outputs Power On Button Press this button to turn on the power Remote Control FunctionsDelay See page 26 for a list of these functions That corresponds to the unit you wish to operateSee page 24 for more information Again to operate the AVR’s functions with the remoteHas been pressed See page 24 for more information on RDSInstallation and Connections Audio Equipment ConnectionsVideo Equipment Connections Important Note for Adapter Cables Volume on the TV must be reduced to minimumScart A/V Connections Important Notes for S-Video connectionsSpeaker Placement Speaker SelectionInput Setup System ConfigurationSettings to be Made With Each Input Used Speaker SetupCEN Spkr Surround Setup Delay SettingsNight Mode Settings Output Level AdjustmentOn the remote only, not the main volume controls Basic Operation Controls and Use of HeadphonesOperation Source SelectionSurround Mode Chart Dolby Digital Surround Mode SelectionDigital Audio Playback Coaxial inputs of the AVRSelecting a Digital Source Digital Status IndicatorsNight Mode PCM Audio PlaybackTape Recording Output Level Trim AdjustmentMemory Backup Display BrightnessTuner Operation RDS OperationRemote Program Search PTYFunction List AVRMain Power Switch 1is pushed Troubleshooting GuideProcessor Reset Press the AVR selectorTechnical Specifications Page Harman Consumer International

AVR1550 specifications

The Harman-Kardon AVR1550 is a home theater receiver that has gained recognition for its remarkable blend of modern technology and classic audio performance. This model is designed to deliver a high-quality sound experience, catering to both audiophiles and casual listeners who seek an immersive home entertainment solution.

One of the standout features of the AVR1550 is its powerful amplification, boasting up to 50 watts per channel. This allows users to enjoy rich and dynamic sound across various media, from movies to music. The receiver supports multiple audio formats, including Dolby Digital and DTS, ensuring compatibility with a wide range of movies and gaming experiences. Additionally, it features a 5.1-channel configuration, which provides a complete surround sound experience, enveloping listeners in their favorite content.

The AVR1550 incorporates several advanced technologies that enhance its performance. For instance, it is equipped with a multi-room audio setup, allowing users to enjoy different audio sources in various rooms simultaneously. This feature is particularly advantageous for larger homes where different family members may want to listen to different music or watch different programs.

Another notable characteristic of the AVR1550 is its user-friendly interface. The setup process is straightforward, aided by an on-screen display that guides users through the configuration of speakers and inputs. This accessibility makes it easier for anyone to optimize their home theater system without needing a deep understanding of audio equipment.

Connectivity is another vital aspect of the Harman-Kardon AVR1550. It offers multiple HDMI inputs, enabling users to connect various devices ranging from gaming consoles to Blu-ray players. This versatility ensures that the receiver can seamlessly integrate into any entertainment setup. Additionally, the AVR1550 supports component and composite video connections, making it adaptable for older equipment as well.

The design of the AVR1550 is both elegant and functional. With its sleek lines and minimalist aesthetics, it can fit seamlessly into any home theater setup without being obtrusive. The intuitive front panel controls also allow for easy adjustments on-the-fly.

In conclusion, the Harman-Kardon AVR1550 stands out for its powerful audio performance, advanced features, and elegant design. It remains a solid choice for anyone looking to enhance their home entertainment experience with quality sound and user-friendly technology. Whether for movie nights or music sessions, the AVR1550 delivers a compelling audio performance that caters to a variety of listening needs.
Top Page Image Contents