Barnes & Noble BP27D, BP27HT, BP27A operation manual

MENU

HOME

Manual Index

SECTION: A- PUMP SPECIFICATIONS

DISCHARGE:	1-1/2", (38) N.P.T. Female, Vertical.
LIQUID TEMPERATURE:
Standard:	104°F (40°C) Continuous.
High Temp:	200°F (93°C) Continuous.
MOTOR HOUSING:	Cast Iron ASTM A-48, Class 20 Min.
PUMP BODY:
BP27, A, D & HT	Cast Iron ASTM A-48, Class 20 Min.
STRAINER:Standard:	Polypropylene, .50 x .50 Slot Size
High Temp:	Brass .22 x .22 Slot Size
IMPELLER: Design:	5 Vane, Open.
Material:	Polypropylene.
SHAFT:	Steel
SQUARE RINGS:	Buna-N
HARDWARE:	300 Series Stainless Steel
PAINT:	Air Dry Water Soluble Enamel
CABLE ENTRY:	10 ft. (25mm) Cord with Plug and
	Pressure Grommet for Sealing and
	Strain Relief.

SEAL:	Design:	Single Mechanical, Oil-Filled
		Reservoir.
	Material:	Rotating Faces - Ceramic
		Stationary Faces - Carbon
		Elastomer - Buna-N
		Hardware - 300 Series Stainless
SPEED:		1550 RPM
LOWER BEARING:
	Design:	Sleeve
MOTOR:	Design:	Oil-Filled.
	Insulation:	Class A.
SINGLE PHASE:		Shaded Pole. Includes Overload
		Protection in Motor.
FLOAT:	BP27:	None
	BP27A:	Wide Angle, Mechanical, 10ft Cable,
		With Piggy-Back Plug.
	BP27D:	Diaphragm w/Piggy-Back Plug.
	BP27HT	Float Supplied seperately.
MINIMUM SUMP DIA:		18" (457mm)

BP27A,	* Factory Set, Adjustable.			inches
BP27, (Less Float)				(mm)
		1.50 (38) NPT
BP27HT with or without Float
		DISCHARGE
				3.89
3.25	120°	*9.00		(99)
	Pumping			7.29
(83)		(229)
	Differential			(185)
6.75			1.32 (34)
(172)
			9.55
SUCTION	2.25 (57)		(243)
BP27D			1.50 (38) NPT
			DISCHARGE
			9.55
			(243)
			1.32 (34)
3.25				3.89
(83)				(99)
				9.90

	6.75	(252)
	(172)
SUCTION		2.25 (57)

4