Harman-Kardon AVR 645 owner manual Surround Config then press the Set, Button FQ

Page 28

System Configuration

When a mode is ON, the mode will appear in all menu selections whenever you are changing the surround mode.

When a mode is OFF, the mode will not appear.

Some modes, such as Dolby Digital, DTS and the Stereo mode in the PCM menus, are not defeatable.

A complete list of the AVR’s surround modes may be found on page 38, but here are some items that will help you decide which modes you want included in your setup, and which modes you may wish to turn off.

The DOLBY MULT CONFIG group contains the surround modes available when a multichannel Dolby Digital, encoded source is present. This includes both the native Dolby Discrete mode, which cannot be turned off, as well as other modes which may be applied as post-processing on the source and system speaker configuration.

The DOLBY 2.0 CONFIG group contains the surround modes available when a two-channel Dolby Digital-encoded source is present. This includes both the native Dolby Discrete mode, which cannot be turned off, as well as other modes which may be applied as post-processing on the source and system speaker configuration.

The DTS CONFIG group contains the sur- round modes available when a DTS-encoded digital source is present. This includes both the native DTS Discrete mode, which cannot be turned off, as well as other modes which may be applied as post-processing on the source and system speaker configuration.

The PCM 44.1/48KHZ CONFIG group contains the surround modes available when a PCM digital data stream is present. This includes not only PCM sources from DVD or CD players, but also all two-channel analog sources that are in use, as they are converted to PCM within the AVR 645. The modes available include the proprietary Dolby modes (including Dolby Headphone and Dolby Virtual Speaker), DTS processing, our own Logic 7 modes, the conventional “DSP” modes (such as “Hall” and “Theater”) and the “Stereo” modes.

The PCM 96KHZ CONFIG group contains the surround modes available when a PCM digital data stream is present. This includes not only 96kHz PCM sources from DVD or CD players, but also all two-channel analog sources when 96kHz is chosen in the

ADC SAMPLING mode line in the SUR- ROUND SETUP menu. The modes available include the proprietary Dolby mode (including Dolby Headphone and Dolby Virtual Speaker), DTS processing, our own Logic 7 modes, the conventional “DSP” modes (such as “Hall” and “Theater”) and the “Stereo” modes.

Note: When a Dolby Digital or DTS source is selected and playing, the AVR will select the appropriate surround mode automatically, no mat- ter which surround mode was selected for that input as default. Then no other surround modes will be available, except all Pro Logic II modes with Dolby Digital 2 channel (2.0) recordings.

On the Dolby menu (Figure 15), the selection choices include Dolby Digital, Dolby Pro Logic II and IIx Music, Dolby Pro Logic II and IIx Cinema, Dolby Pro Logic, Dolby Virtual Speaker Reference and Wide, and Dolby 3 Stereo. A complete expla- nation of these modes is found on Page 38.

The Dolby Digital EX mode is only available when the system is set for 6.1/7.1 operation by config- uring the Surround Back speakers to “Small” or “Large” as described on page 33. When a disc is playing that contains a special “flag” signal in the digital audio data stream, the EX mode will be selected automatically. It may also be selected using this menu or through the front panel or remote controls. A complete explanation of these modes is found on page 38.

When all surround modes that are not required have been turned off, press the /¤ Navigation Button EF until the on- screen cursor is pointing to BACK TO

SURROUND CONFIG; then press the Set

Button FQ.

The final item on the SURROUND SETUP menu is the DOLBY SURR SETUP line. When the on-screen cursor is at this line, press the Set Button FQ to call the DOLBY SURROUND menu (Figure 13) up on the screen.

When the cursor is pointing to the MODE line, press the /Navigation Buttons EF to select the desired Dolby surround mode, again remembering that the choice of available modes will vary with the type of pro- gram material being played and the number of speakers in your system configuratioin.

* * D O L B Y S U R R O U N D * *

M O D E : D O L B Y P L I I x

 

 

M U S I C

 

C E N T E R

W I D T H :

3

D I M E N S I O N

:

0

P A N O R A M A :

O F F

O N

N I G H T :

O F F

M I D

M A X

B A C K T O S U R R O U N D S E T U P

Figure 15

When Dolby Pro Logic II Music or Dolby Pro Logic IIx Music is selected as the listening mode, three special settings are available to tailor the sound field to your listening room environment and your individual taste and preferences. (When other Dolby Surround modes are selected, dotted lines will indicate that these settings are not active.)

Center Width: This setting adjusts the balance of the vocal information in the front soundstage between the center and front left/right speakers. The lower settings spread the center channel sound more broadly into the left and right channels. A higher number (up to “7”) produces a tighter center channel presentatioin.

Dimension: This setting alters the perceived depth of the surround field by creating a shallower presentation that appears to move sounds toward the front of the room, or a deeper presentation that appears to move the center of the sound field toward the back of the room. The setting of “O” is a neutral default, with the range of adjustment shown as “R-3” for a deeper, rear-oriented sound to “F-3” for a shallower, front-oriented sound.

Panorama: Switch this setting on or off to add an enveloping wrap-around presentation that increases the perception of sound along the sides of the room.

To change these parameters, press the /¤ Navigation Buttons EF while the DOLBY SURROUND menu is on the screen until the cursor is pointing to the line on the menu with the parameter you wish to change. Then, press the /Navigation Buttons EF to alter the setting to your taste.

Note that when the Dolby Digital mode is selected there are additional settings available for the Night mode that are associated with the surround mode only, not with the input. That´s why these settings must be made only once, not with each input in use.

28SYSTEM CONFIGURATION

Image 28
Contents AVR 645 Audio/ Video Receiver Table of Contents Declaration of ConformityDescription and Features IntroductionImportant Safety Information Introduction / Safety InformationUnpacking Front Panel Controls Coaxial Ó To select between the OpticalMore information Rear Panel Connections Surround Left Blue Surround Right Gray Surround Back LeftSurround Back Right Tan Subwoofer LFE Digital AudioAC Power Cord Jack Connect the AC Digital Audio Outputs Connect theseDigital recorder such as a CD-R or MiniDisc recorder Monitor Component Video Outputs+ and negative terminals AVR 645 when appropriate upgrades are availableRemote IR Carrier Output The output Main Remote Control Functions Light ButtonChannel Direct Inputs the input Movies Disc Skip Button This button has noMain Remote Control Functions Power Off B AVR Selector Zone II Remote Control Functions The Bridge /DMP Selector Media Player DMP Connector Optional is connected to DigitalInstallation and Connections Audio Equipment ConnectionsAnalog Video Equipment Connections Output jacksHdmi Connections Hdmi Input ConnectionsVideo Inputs Connection NotesHdmi Output Connections Scart A/V ConnectionsTo the Video 2 or Video 3 Video Audio Important Note for Adapter CablesWith Scart that cannot be switched and pro- vided by the AVR Important Note for the Use SCART-Cinch AdaptersSystem and Power Connections Main Room Remote Control ExtensionBUS Installation Connections Multiroom IR LinkSpeaker Placement AC Power ConnectionsSpeaker Selection USB ConnectionsTo manually configure your surround back speaker Channel system for your main listening area seeSystem Configuration Using the On-Screen DisplaySystem Setup First Turn OnIn/Out Setup C O U T A L O G Video Monitor Settings Audio SetupSurround Setup Surround Config then press the Set Button FQUsing EzSet/EQ Night Mode SettingsC K So that on is highlighted and press the Set Button F R F I E L D E QSpeaker Size Menu Manual SetupSpeaker Size LFE Low-Pass-Filter Setting SmallSub Mode Setting Delay SettingsFollowing options are available Subwoofer SizeOutput Level Adjustment Volume until you can hear the test noise clearly SetupAdditional Input Adjustments Operation Surround Mode ChartChannel Theater Channel presentation of two-channel stereo programsSource Selection Basic OperationChannel/8-Channel Direct Input Volume Up/Down Buttons Surround Mode SelectionRepeatedly to scroll through the list of available modes Digital Audio Playback Until Surr OFF appears in the Main Information Display ˜Dolby Digital Rear panel Or front panel *ÓSelecting a Digital Source Digital Bitstream IndicatorsUSB Playback Audio, while the main feature is available Speaker/Channel IndicatorsNight Mode Using Tape RecordingFront Panel In/Outputs Puts for Tape OutputsOutput Level Adjustment With Source Signals Memory BackupNormal output level adjustment for EzSet/EQ On/OffAdvanced Features Turn On Volume LevelFront-Panel-Display Fade Display BrightnessFull-OSD Time Out Adjustment Semi-OSD SettingsDMP/ TheBridgeTMAuto Power Multiroom Operation Multiroom OperationInfrared Output Selection Multiroom IR InputIR Output Full Carrier IR OutputBasic Tuner Operation Tuner OperationRDS Operation Program Search PTY Up/Down button # until RDS only appears in the displayConfiguring the Remote Preprogrammed Code EntryFor Button F appearsLearning Commands Automatic Code EntryDevice Priority Learning Codes for an Input SelectorPress the ¤ Navigation Button E until Changing Devices Macro ProgrammingErasing a Macro Power On VID 2/TV VID 3/Cable AVR Logic 7 OAt the next menu screen press Punch-Through Configuration Volume Punch-ThroughReturning the Volume Control Settings to Default Operation ButtonsReturning the Channel Control Settings to Default Operation At the next menu screen, press the ⁄¤Transport Punch-Through Navigation Buttons E untilRenaming ‹ /› Navigation Buttons E as requiredAt this point you have two options Resetting the RemoteSee page 54 for more information Additional Notes on Configuring and Operating the Remote Backlight OptionsTroubleshooting Guide Processor ResetPower Switch 1 is pushed Press the AVR Selector BVideo Input Defaults System DefaultsSystem Default and Personal Settings Worksheets Worksheet C Delay Defaults and Setting Worksheet B Surround Configuration Defaults and SettingsWorksheet D System Defaults and Settings Worksheet E Input Settings USBTechnical Specifications Harman Consumer Group, Inc

AVR 645 specifications

The Harman-Kardon AVR 645 is a standout receiver that appeals to audiophiles and home theater enthusiasts alike. This model is known for its rich sound quality, extensive features, and user-friendly interface, making it a solid choice for anyone looking to enhance their home entertainment experience.

At the heart of the AVR 645 is its robust amplification system. With a power output of 55 watts per channel at 8 ohms, the receiver provides ample power to drive a variety of speakers. The incorporation of Harman-Kardon's patented Logic 7 processing technology allows for an immersive surround sound experience, creating a sense of depth and realism in audio playback. This feature is particularly beneficial for film and gaming, as it helps to create a multidimensional soundstage that pulls viewers into the action.

The AVR 645 supports a variety of audio formats, including Dolby Digital, DTS, and Pro Logic II, ensuring compatibility with a wide range of media. The receiver is equipped with multiple audio inputs and outputs, including HDMI, optical, and coaxial connections, allowing users to easily connect their DVD players, gaming consoles, and other devices. Additionally, it features a built-in AM/FM tuner for those who enjoy traditional radio.

In terms of video capabilities, the AVR 645 is highly versatile, supporting both standard and high-definition video formats. The receiver includes multiple HDMI inputs, facilitating easy switching between different high-definition sources without compromising video quality. The ability to upconvert lower resolution video to near-HD quality further enhances the viewing experience, making it a great choice for those with diverse video content.

User-friendliness is another highlight of the AVR 645. The intuitive on-screen user interface makes it easy to navigate settings and setup configurations. The Zone II feature allows for audio playback in another room, expanding the potential for whole-home audio solutions.

Ultimately, with its blend of power, quality, and versatility, the Harman-Kardon AVR 645 remains a respected choice among home theater systems, ensuring an elevated audio and visual experience for all users.