Using Your Handheld Steam Cleaner, Refilling

Using Your

Handheld Steam Cleaner

FILLING BOILER

1.Place Handheld Steam Cleaner on a flat, level surface.

2.Make sure power cord is unplugged from electrical outlet.

3.Cautiously remove Boiler Cap by unscrewing it in a counter-clockwise direction, and lift it off.

CAUTION: Refer to Refilling procedure below for additional safety precautions that must be taken when refilling the unit after it has been in use.

4.Boiler should always be emptied after each use. If it was not emptied after the previous use, empty it now – this will make it easier to fill with the correct amount of water.

5.Fill included Measuring Cup with 6 oz. (180 ml.) of water.

NOTE: In order to extend the life of your Handheld Steam Cleaner and keep it functioning at it’s maximum potential, it is highly recommended that distilled or de-mineralized water be used in Boiler.

6.Carefully pour water from Measuring Cup into Boiler through fill hole.

NOTE: Do not exceed the Boiler’s maximum capacity of 6 oz. (180 ml.). This will ensure a better flow of steam with minimal dripping water.

7.Replace Boiler Cap, screwing it in a clockwise direction to tighten. Make sure it is screwed on securely to prevent hot water or steam from escaping.

REFILLING

If unit has been in use, always use the following safety precautions before removing the Boiler cap to add water:

1.Unplug power cord from electrical outlet.

2.Allow 5-10 minutes for Boiler to cool.

3.Press and hold Steam Button to release any remaining steam pressure. Steam can remain pressurized inside Boiler for up to one hour after use.

4.Slowly remove Boiler Cap and add water as outlined in Steps 3-7 of Filling with Water procedure above.

CAUTION: Boiler may contain some amount of water that is still hot – use care when refilling to avoid burns or other injury.

WARNING: Extreme caution should be used when pouring water into a Boiler that was recently heated – cool water introduced into a warm Boiler may result in a small burst of steam and water. Do not look directly down into fill hole when filling. Keep your free hand and any children or pets at a safe distance.

ENGLISH 9

MC1226 specifications

The McCulloch MC1226 is a versatile and robust chain saw designed for both amateur and professional users. It combines a powerful engine with advanced features to ensure maximum efficiency and performance for a wide range of cutting tasks.

One of the standout features of the MC1226 is its engine. Equipped with a 26 cc two-stroke engine, this chain saw provides ample power for cutting through various types of wood. The engine's design also promotes fuel efficiency, allowing users to work longer without frequent refueling. The lightweight nature of the MC1226, weighing in around 5.2 kg, makes it easy to handle and maneuver, reducing fatigue during extended use.

The MC1226 features a 25 cm guide bar, which strikes a perfect balance between reach and control. This bar length is ideal for light to medium-duty tasks, such as pruning branches or felling small trees. The Oregon chain delivers smooth and efficient cutting performance, making it an excellent choice for both trimming and heavy-duty jobs.

The chain saw also incorporates several technologies aimed at enhancing user experience and safety. One such feature is the automatic oiling system, which ensures the chain remains well-lubricated during operation. This reduces wear on both the chain and guide bar, extending the lifespan of the saw. Furthermore, the MC1226 is equipped with an easy start system, which requires less force to pull the starter cord, making it more accessible for users of all experience levels.

Safety is a paramount concern, and the McCulloch MC1226 integrates several safety features, including a chain brake, which stops the chain instantly in the event of kickback. This important feature, along with the throttle lock, ensures safe operation while cutting.

Additionally, an ergonomic handle design provides a comfortable grip, reducing hand strain during use. The saw's vibration-dampening system minimizes vibrations, contributing to user comfort and allowing for more precise cutting.

In summary, the McCulloch MC1226 chain saw packs a punch with its powerful engine, efficient design, and user-friendly features. It's an ideal choice for homeowners and professionals alike who require a dependable tool for yard work and light forestry tasks. With its combination of power, ease of use, and safety features, the MC1226 stands out in the competitive chain saw market.