Bunn ITB, TWIN manual SET RECIPE TEMPS ITCB only, PROGRAMMING THE BREWER cont

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

* SET RECIPE TEMPS (ITCB only)

This function allows the operator to set separate tem- peratures for each selected recipe.

NOTE: Setting recipe temps will override the MASTER TEMP. The tank will hold at the lowest temperature between the three selected recipes stored in the brew buttons. For instance, let’s say Brew A’s recipe tem- perature is set at 205°, Brew B’s recipe temperature is set at 205°, and Brew C’s recipe temperature is set at 200°. The tank will hold at 200°. If Brew A or Brew B is pressed, the tank will heat to the 205° temperature. The brew button must be pressed again in order for a brew to start. After the completion of that brew, the tank will return to the 200° holding temperature. It may take awhile for the tank to return to the lower temperature.

1.Press and hold the right hidden switch until the display reads SET LANGUAGE. Press and release the right hidden switch until the display reads SET RECIPE TEMPS.

2.To set different temperatures for different recipes, press and release YES. Pressing NO will advance to the next programming function, SERVICE TOOLS.

3.The display should read WILL OVERRIDE THE MASTER TEMP, and then OVERRIDE? To retain the MASTER TEMP setting, press and release NO. To set separate recipe temperatures, press and release

YES.

4.The display should read TEA 1. Using (-)and (+), adjust the temperature for TEA 1. When finished, press and release DONE.

5.The screen should now read TEA 2. Use (-)and (+) to adjust the temperature for TEA 2. When finished, press and release DONE.

6.Repeat for all standard and stored recipes.

7.After the last temperature has been entered, press DONE. The screen should now read TANK WILL HOLD AT LOWEST TEMP, and then advance to the ENTER ASSET # screen. To exit programming and return to the MAIN SCREEN, press ENABLE BREW ON/OFF switch.

NOTE: To return to using the MASTER TEMP setting after RECIPE TEMPS have been used, press and hold the right hidden switch until the display reads SET LANGUAGE. Press and release the right hidden switch until the display reads SET RECIPE TEMPS. Select YES. The display will read WILL OVERRIDE THE MASTER TEMP, and then OVERRIDE? To return to using the MASTER TEMP, select NO. To exit programming and return to the MAIN SCREEN, press ENABLE BREW ON/ OFF switch.

SET RECIPE TEMPS

NO YES

PRESSING NO WILL

ADVANCE TO

ENTER ASSET #

WILL OVERRIDE

THE MASTER TEMP

OVERRIDE?

NO YES

PRESSING NO

WILL

RETAIN THE

MASTER TEMP

TEA 1	XXX°
(-)	DONE (+)

TEA 2	XXX°
(-)	DONE (+)

COFFEE		XXX°
(-)	DONE	(+)

TANK WILL HOLD

AT LOWEST TEMP

ENTER ASSET #?

NO YES

Page 27 41581.2 091609