PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
* BREW COUNTERS
This function allows the operator to track the total num- ber of brew cycles completed, as well as the number of batches brewed using each of the brew buttons. There are (up to) six resettable counters, and one life counter that is not resettable.
Procedure to view/reset the brew counters:
1.Press and hold the right hidden switch until the display reads SET LANGUAGE. Press and release the right hidden switch until the display reads BREW COUNTERS.
2.Pressing NO will advance to the next programming function. Select YES to view the first brew counter (TOTAL LIFE BREWS). This number represents the total number of brew cycles this brewer has com- pleted. This counter is
3.This counter represents the number of brews for Brew A on the left side of the brewer. To reset the counter to zero, press and release RESET. Press and release NEXT to advance to the next counter.
4.Repeat step 3 for the remaining two left counters, BREW B and BREW C.
5.Repeat step 4 for the three right side brew counters. (Twin only)
6.When finished, press NEXT to advance to the next programming function, ENTER ASSET #. To exit programming and return to the MAIN SCREEN, press ENABLE BREW ON/OFF switch.
PRESSING NO WILL
ADVANCE TO
ENTER ASSET #
ICB Twin
shown.
ITB/ITCB
similar
BREW COUNTERS?
NO YES
TOTAL LIFE BREWS
XXXX NEXT
<- <- XXX BREW A
RESET NEXT
<- <- XXX BREW B
RESET NEXT
<- <- XXX BREW C
RESET NEXT
BREW A XXX
RESET NEXT
BREW B XXX
RESET NEXT
BREW C XXX
RESET NEXT
ENTER ASSET #?
NO YES
Page 26 | 41581.2 091609 |
|