Bunn ITB, TWIN manual to the test switch procedures on, outputs procedures on page

TROUBLESHOOTING (cont.)
	PROBLEM	PROBABLE CAUSE			REMEDY
	Brew cycle will not start	1. No water			Check plumbing and shut-off
					valves
		2. No power or incorrect voltage to			Check for voltage across the termi-
		the brewer			nals at the terminal block.
		3.	ON/OFF switch		Test the ON/OFF switch. Refer
					to the test switch procedures on
					page 50.
		4.	Brew switch		Test the BREW switch. Refer to the
					test switch procedures on page
				50.
		5.	Brew valve		Test the brew valve. Refer to the test
					outputs procedures on page 48.
		6.	Control Board		Substitute a control board known
					to be in good working order.

Page 31 41581.2 091609