Hamilton Beach HB-165 owner manual Troubleshooting, Problem Cause Solution

Page 10

WARNING! Shock Hazard: Never immerse the steam cleaner, cord or plug in water or any other liquid.

7. TROUBLESHOOTING

WARNING! Shock Hazard: To reduce risk of personal injury, unplug steam cleaner before servicing.

PROBLEM

CAUSE

SOLUTION

The steam cleaner won’t run

It is not properly plugged into the

Plug in firmly.

 

wall outlet.

 

 

 

 

 

There is no electricity in the wall

Check the home fuse or breaker.

 

outlet.

 

 

The on/off switch is not turned on.

Push on/off switch to on.

 

Blown fuse/tripped breaker in

Reset the electrical box circuit

 

home electrical box.

breaker or replace fuse.

 

 

 

The accessories will not connect.

The incorrect accessory is being

Refer to Attachments section for

 

used.

proper instructions.

 

There is a blockage in the guide

Remove debris from the guide

 

opening.

opening.

 

 

 

 

Clogged flexible hose.

Remove obstructions.

 

 

 

An accessory will not disconnect

The red safety pin is not being

Refer to Attachments for proper

from the flexible hose.

pulled back.

instructions.

Steam cleaner sprays out water

Water level in reservoir may be too

Properly remove safety cap and

from nozzle.

high.

pour out excess water.

 

 

 

 

Steam cleaner not fully heated.

Allow the steam cleaner to heat

 

 

the water.

8

Image 10
Contents Steam Cleaner Welcome IndexImportant Safeguards Read ALL Instructions Before Using this ApplianceSave These INSTRUCTIONS!  Parts and Accessories HOW to Operate HOW to AssembleFor Household USE only Preparing the Steam Cleaner Attachments General Maintenance Troubleshooting Problem Cause SolutionLimited Warranty Further Limitations and Exclusions