Carpet refreshing, After use Fig. N & O | Black & Decker FSMH16151

ENGLISH

(Original instructions)

uWhen you have finished using the steam mop, return the handle (10) to the upright position and turn it ‘OFF’ and wait until the steam mop cools down. (approximately five

minutes)

Caution! It is important to monitor the water level in the water tank. To refill the water tank and continue to sanitise/clean, re- turn the handle (10) to the upright position and turn the steam mop ‘OFF’. Unplug the unit from the electrical wall outlet, refill the water tank (8).

Caution! Never leave the steam mop in one spot on any surface for any period of time. Always place the steam mop with the handle (10) in the upright position when stationary and make sure the steam mop is turned off when not in use.

Carpet refreshing

uPlace a cleaning pad (12) on the floor with the ‘hook & loop’ side facing up.

uLightly press the steam mop down onto the cleaning pad

uPlace the carpet glider (14) on the floor.

uLightly press the steam mop down onto the carpet glider

(14)until it clicks into place.

uConnect the steam mop to the mains.

uPress the ON/OFF button (1). It takes approximately 15 seconds for the steam mop to heat up.

uPress the AutoselectTM button (6) to the Wood/Laminate setting.

uPulling the handle (10) back will activate the steam pump. After a few seconds steam will start to come out of the steam head.

Note: When first filled or after running dry it can take up to 45 seconds for steam to be produced.

uPush and pull the steam mop slowly across the carpet to thoroughly refresh each section.

Note: During use you may turn off the steam pump by return- ing the handle to the upright position, this convenient feature will allow you to leave the steam mop for a short time so that you may move items of furniture, then continue cleaning without the need to switch the appliance off.

uWhen you have finished using the steam mop, return the handle (10) to the upright position and turn it ‘OFF’ and wait until the steam mop cools down. (approximately five minutes)

Caution! If steam is observed escaping from the join between the hand held steam cleaner and the steam mop body, switch off and disconnect the unit from the mains supply. Allow to cool. Remove the hand held steam cleaner from the steam mop body. Inspect the seal (26) on the steam nozzle (4) and hose (27) (fig. K). If the seal is missing or damaged then please contact your nearest authorised repair agent. Do not use the appliance. If the seal is in good condition re-fit the hand held steam cleaner to the steam mop body ensuring that it is seated firmly in place.

After use (Fig. N & O)

uReturn the handle (10) to the upright position and turn the steam mop ‘OFF’,

uWait until the steam mop cools down. (approximately five minutes)

uUnplug the steam mop from the electrical wall outlet.

uEmpty the water tank (8).

uRemove the cleaning pad (12) and wash it ready for next use. (Take care to follow the wash care instructions printed on the cleaning pad).

uWrap the supply cable around the cable tidy hooks (15 & 16).

Note: The top cable tidy hook (16) rotates to easily release the cable ready for next use.

uClip the supply cable onto itself using the cable tidy clip (32) close to the plug.

Note: With the handle (10) in the upright position, the cable neatly wrapped around the cable tidy hooks (15 & 16) and secured with the cable tidy clip (32) your steam mop will stand on its own for storage. Alternatively there is a hanging bracket

(33)built into the hand grip (34) which will allow your steam mop to be hung from a suitable hook on the wall. Always ensure that your wall hook is capable of supporting the weight of the steam mop safely.

Hand held steam cleaning

uAttach the required accessory.

uConnect the hand held steam cleaner to the mains.

uPress the ON/OFF button (1). It takes approximately 15 seconds for the hand held steam cleaner to heat up.

uLift the lock off (2) and pull the trigger switch (3) to activate the steam pump. After a few seconds steam will start to come out of the accessory.

Note: When first filled or after running dry it can take up to 45 seconds for steam to be produced.

Note: During use you may turn off the steam pump by releas- ing the trigger switch, this convenient feature will allow you to place the hand held steam cleaner down for a short time so that you may move items of furniture, then continue cleaning without the need to switch the appliance off.

FSMH1621S, FSMH16151 specifications

Black & Decker, a brand synonymous with quality and innovation in home appliances, offers a range of versatile steam mops, including the FSMH16151 and FSMH1621S models. These steam mops are designed to make household cleaning more efficient and effective, utilizing advanced technologies to handle tough stains and maintain pristine floors.

One of the standout features of the FSMH16151 and FSMH1621S is their impressive steam generation. Both models utilize a rapid heating system that allows users to quickly heat up the water and deliver powerful steam in under 30 seconds. This quick start time means less waiting and more cleaning. The steam mop also boasts an adjustable steam feature, allowing users to select the right level of steam based on the type of floor being cleaned and the level of dirt present. This flexibility ensures that users can tackle everything from light dusting on delicate surfaces to heavy-duty scrubbing on tougher stains.

Another notable characteristic is the built-in SmartSteam technology. This innovative technology automatically adjusts the steam output to suit various cleaning surfaces. Whether you are dealing with hardwood, tile, or laminate, the FSMH16151 and FSMH1621S are engineered to provide optimal cleaning performance while protecting your floors from excessive moisture and heat.

The design of both steam mops is user-friendly, featuring a lightweight construction that makes maneuverability a breeze. The swivel steering offers easy access to corners and tight spaces, maximizing cleaning efficiency. Additionally, the large water tank capacity reduces the need for constant refills, allowing for extended cleaning sessions without interruption.

Simplifying maintenance, these models come equipped with washable and reusable microfiber pads. These pads effectively trap dirt and grime, and their reusable nature makes them an eco-friendly option compared to disposable cleaning cloths. The convenience of being able to toss the pads in the washing machine after use ensures hygiene and sustainability.

Safety is also a top priority in the design of these steam mops. They are built with an automatic shut-off feature that activates when the unit is not in use, providing peace of mind for users.

In summary, the Black & Decker FSMH16151 and FSMH1621S steam mops stand out in the crowded market of cleaning appliances. With their rapid steam generation, SmartSteam technology, user-friendly design, and eco-friendly cleaning pads, they promise to make home cleaning more efficient and enjoyable. These steam mops are ideal companions for maintaining a clean and healthy living environment.