Dealer Installation Instructions

Forced air handler/furnace systems:

The HEPA system should be installed as a bypass system, with part of the return ducted into the HEPA system. The filtered air is then rerouted back into the return air, and continues through the system to be heated/cooled.

Typical Return to Return Application

For homes with upflow forced air handler/furnace systems.( Air handler/furnace is shown in a typical basement.)

Typical Return to Return Application

For homes with horizontal forced air handler/furnace systems. (Air handler/ furnace is shown in an typical attic.

Distance between A and B should be 6' to 16' for best results

Air Handler/

Furnace

Air

BHandler/Furnace

Filter

HEPA System

Distance between A and B should be 6' to 16' for best results

NOTE: This filtration system is an ADDITIONAL filter, and does NOT replace the existing air handler/furnace system filter.

Preparation:

Here are some things to consider as you decide where to install the HEPA system.

Location:

•Make sure there is room to open the HEPA filter access panel for filter changes/inspections.

•Keep the HEPA system in a location where you can still access the air handler/furnace filter.

•Keep the HEPAsystem away from possible water damage.

•Vibration pads will reduce vibration for installations where the unit is placed on the floor.

•Install HEPA System on floor or suspended platform. If the unit is suspended, screws must not penetrate through the cabinet. Make sure that you have the proper chains/straps/joists and equipment to keep unit secure. Intake (Marked as ‘Air In’ on unit):

•Intake ducts should be installed upstream of any humidifiers and be installed on the main return.

•Intake duct should be installed at least 6 ft. away from the outflow duct on the main return. Outflow (Marked as ‘Clean Air Out’ on unit):

•Outflow duct should be installed as close to the air handler/furnace inlet as possible but not directly into the return air elbow of the main return.

•If the unit is being installed independently of any other system, room diffusers are recommended to help distribute airflow evenly in the occupied space.

Ducting:

•If HEPA system is installed where inlet and outflow collars face down, metal elbows must be connected to both inlet and outflow collars.

•Each connection must be sealed with aluminum tape or mastic, including all take offs.

•Installed duct runs should be as straight as possible (if the duct runs are too long, reduced CFM may result).

•If duct is exposed to unconditioned air, externally insulated flex duct is highly recommended.

•Externally insulated flex duct can also be used for noise reduction purposes.

•For best indoor air quality, do not use ductboard or fiberglass inside of ducts.

Electricity:

• The unit must be plugged into a grounded 120V, 60Hz outlet.

Required Materials for Installation of Unit:

Items for 350

Flex or rigid duct (length as required)	8” round & 6” round

Takeoffs	One 8” & One 6”

Items for 675

Flex or rigid duct (length as required)	10” round & 8” round

Takeoffs	One 10” & One 8”

All Models

Aluminum tape or mastic as required

Misc. hanging materials - field provided

NOTE: Be sure to review ‘Rules for Safe Installation and Operation’ on page 1 of this document before start-up of this unit.

350 specifications

The Electrolux 350 is an innovative addition to the world of home appliances, designed to enhance everyday cleaning experiences while maintaining a commitment to sustainability and efficiency. This versatile vacuum cleaner combines advanced technology with user-friendly features, appealing to a broad range of consumers who prioritize cleanliness and convenience.

One of the standout features of the Electrolux 350 is its powerful suction capability. Equipped with a high-performance motor, the vacuum ensures efficient dirt and debris removal on all floor types, including carpets, hardwood, and tiles. The adjustable suction settings allow users to customize the intensity based on the surface being cleaned, making it incredibly versatile for various cleaning tasks.

The Electrolux 350 also incorporates advanced filtration technology. Its multi-stage filtration system captures allergens and fine particles, making it an ideal choice for allergy sufferers and households with pets. The HEPA filter effectively traps dust and other allergens, ensuring that the air remains clean and fresh during and after vacuuming. Moreover, the filter is washable and reusable, contributing to the vacuum's eco-friendly profile.

Another notable characteristic of the Electrolux 350 is its ergonomic design. The lightweight construction facilitates easy maneuverability, allowing users to navigate through tight spaces and around furniture with ease. The vacuum comes with a variety of attachments, including a crevice tool, dusting brush, and upholstery nozzle, enhancing its capability to tackle different cleaning tasks.

The Electrolux 350 also features a large dust container, minimizing the need for frequent emptying. This, combined with a straightforward emptying mechanism, ensures a hassle-free cleaning process. Additionally, the vacuum operates quietly, making it suitable for use in homes with children or pets without causing disruptions.

In terms of power efficiency, the Electrolux 350 is designed with a focus on reducing energy consumption while maintaining optimal performance. This energy-efficient operation not only lowers electricity bills but also aligns with environmentally conscious values.

Overall, the Electrolux 350 stands out for its powerful performance, advanced filtration, ergonomic design, and energy efficiency. It is an excellent choice for those seeking a reliable vacuum cleaner that can handle a variety of cleaning challenges while contributing to a cleaner planet. Whether tackling daily messes or deep cleaning, the Electrolux 350 delivers on both functionality and performance.