Electrolux 350 owner manual Dealer Motor Assembly Replacement Instructions, Electrical diagram

Page 9

Dealer Motor Assembly Replacement Instructions

!WARNING

Electrical Shock Hazard.

Can cause injury or death.

Disconnect all electrical power supplies before servicing.

Do not operate equipment without access panels in place.

!CAUTION

Risk of Sharp Edges Hazard.

Equipment sharp edges can cause injuries.

Avoid grasping equipment edges without protective gloves.

1.Accessing the motor assembly

a.Turn the unit off and unplug it from any electrical source before opening the cabinet.

b.Remove the safety screw(s) from the motor section access panel.

c.Lift the door off the unit.

2.Removing the old motor assembly

a.Disconnect all four motor wires from switch, ground post and capacitor.

b.Disconnect the two white wires from the capacitor.

c.Separate the motor from the motor mount by removing the four screws found in figure 1.

d.Slide the motor out from under the motor mount to remove it from the unit.

3.Installing the new motor assembly

a.Slide the new motor into the motor mount making sure that the wires go through the smaller hole offset from the center of the bracket.

b.Secure the new motor to the motor mount with the four screws removed in step 2c.

c. Connect the wires as follows:

-Black wire from the Plug and Cable (P12) to Line (P3) on the CM71 Power Module

-Green wire from CM71 Power Module to the ground post

-Blue wire from motor to the Motor-2 (P4) post on the CM71 Power Module

-Yellow/green wire from motor to the ground post

-Brown wire from the motor to a Capacitor (C10) post

-Black wire from the motor to the Motor-1 (P2) post on the CM71 Power Module

-White wire from Neutral (P1) on the CM71 Power Module to the black wire on the motor via piggyback post to the empty Capacitor (C10) post.

4.Closing the unit

a.Replace the motor section access panel and secure it with the screws removed in step 1b.

b.Plug the unit into it’s electrical source and turn it on.

Figure 1

Electrical diagram

Image 9
Contents Shipping and Packing List Table of ContentsIntroduction General InformationProduct Application Guidelines Parts Identification Cabinet Parts Physical dimensions of unitFilter parts identification Hepa Cartridge Parts Motor/Impeller Filter Adapter threaded ‘O’ RingDealer Installation Instructions Outflow Marked as ‘Clean Air Out’ on unit Forced air handler/furnace system with an HRV/ERVIntake Marked as ‘Air In’ on unit Operation 350 Filter Light IndicatorsInner Carbon Filter MaintenanceFilter Change Schedule Filter Changing Guidelines Pre-FilterDealer Filter Change Instructions Electrical diagram Dealer Motor Assembly Replacement InstructionsBeam Central Hepa Air Filtration Systems Item List Base same for all models

350 specifications

The Electrolux 350 is an innovative addition to the world of home appliances, designed to enhance everyday cleaning experiences while maintaining a commitment to sustainability and efficiency. This versatile vacuum cleaner combines advanced technology with user-friendly features, appealing to a broad range of consumers who prioritize cleanliness and convenience.

One of the standout features of the Electrolux 350 is its powerful suction capability. Equipped with a high-performance motor, the vacuum ensures efficient dirt and debris removal on all floor types, including carpets, hardwood, and tiles. The adjustable suction settings allow users to customize the intensity based on the surface being cleaned, making it incredibly versatile for various cleaning tasks.

The Electrolux 350 also incorporates advanced filtration technology. Its multi-stage filtration system captures allergens and fine particles, making it an ideal choice for allergy sufferers and households with pets. The HEPA filter effectively traps dust and other allergens, ensuring that the air remains clean and fresh during and after vacuuming. Moreover, the filter is washable and reusable, contributing to the vacuum's eco-friendly profile.

Another notable characteristic of the Electrolux 350 is its ergonomic design. The lightweight construction facilitates easy maneuverability, allowing users to navigate through tight spaces and around furniture with ease. The vacuum comes with a variety of attachments, including a crevice tool, dusting brush, and upholstery nozzle, enhancing its capability to tackle different cleaning tasks.

The Electrolux 350 also features a large dust container, minimizing the need for frequent emptying. This, combined with a straightforward emptying mechanism, ensures a hassle-free cleaning process. Additionally, the vacuum operates quietly, making it suitable for use in homes with children or pets without causing disruptions.

In terms of power efficiency, the Electrolux 350 is designed with a focus on reducing energy consumption while maintaining optimal performance. This energy-efficient operation not only lowers electricity bills but also aligns with environmentally conscious values.

Overall, the Electrolux 350 stands out for its powerful performance, advanced filtration, ergonomic design, and energy efficiency. It is an excellent choice for those seeking a reliable vacuum cleaner that can handle a variety of cleaning challenges while contributing to a cleaner planet. Whether tackling daily messes or deep cleaning, the Electrolux 350 delivers on both functionality and performance.