Harman-Kardon AVR 7000 owner manual Zone II Remote Control Functions

Page 14

Zone II Remote Control Functions

Œ￿

º￿

•￿

¶￿

-￿

Ä￿

©￿

ú￿

I

ŒPower Off: When used in the room where the AVR 7000 is located, press this but- ton to place the unit in Standby. When it is used in a remote room with a sensor that is connected to the Multi IR jack b, this button turns the Multi-Room system on and off.

ºAVR Selector: Press this button to turn on the AVR. The input in use when the unit was last on will be selected.

•Input Selectors: When the AVR is off, press one of these buttons to select a specific input and turn the unit on. When the unit is already in use, pressing one of these buttons will change the input.

Transport Controls: These buttons control the Play, Pause and Stop functions of compatible Harman Kardon CD, DVD and cassette players.

-Tuning Up/Down – Fast Play: When the AVR’s tuner is selected as the input source, these buttons will tune up or down through the frequencies of the chosen band. When a CD, DVD or cassette deck is selected, these buttons activate the Fast Play Forward or Fast Play Reverse functions.

ÄPreset Up/Down – Track Skip: When the AVR’s tuner is selected as the input source, these buttons will move up or down through the list of stations that have been stored in the preset memory. When a CD or DVD player is selected, these buttons activate the forward or reverse track or chapter skip functions.

©Disc Skip: When a compatible Harman Kardon CD or DVD changer has been selected, these buttons activate the Disc Skip function.

úVolume Up/Down: When used in the room where the AVR 7000 is located, press this button to raise or lower the volume in that room. When it is used in a remote room with a sensor that is connected to the Multi IR Jack b, this button will raise or lower the volume in the remote room.

IMute: When used in the room where the AVR 7000 is located, press this button to tem- porarily silence the unit. When it is used in a remote room with a sensor that is connected to the Multi IR Jack b, this button will tem- porarily silence the feed to the remote room only. Press the button again to return to the previous volume level.

ŒPower Off º AVR Selector

• Input Selectors Transport Controls

- Tuning Up/Down – Fast Play Ä Preset Up/Down – Track Skip © Disk Skip

ú Volume Up/Down I Mute

NOTE: The Zone II remote may be used in either the same room where the AVR 7000 is located, or it may be used in a separate room with an optional infrared sensor that is con- nected to the AVR 7000’s Multi IR input jack b. When it is used in the same room as the AVR, it will control the functions of the AVR or any compatible Harman Kardon products in that room. When it is used in a separate room

via a sensor connected to the Multi IR Jack b, the buttons for power, input source, volume, mute and the tuner will control the source and volume for the second zone, as connected to the Multi Out Jacks d. (See page 33 for complete information on using the Multi-Room system.)

14ZONE II REMOTE CONTROL FUNCTIONS

Page 13 Page 15
Image 14
Page 13 Page 15
Contents AVR 7000 Audio/Video Receiver AVR 7000 Audio/Video Receiver Introduction Description and FeaturesFront Panel Input Jacks Switchable to Input or Output While complex digital systems are hardUnpacking Safety InformationImportant Safety Information Front Panel Controls Tuning Selector Volume ControlSurrounding the System Power Control Front Panel Controls Front Panel Information Display Tuned Indicator This indicator illuminates Rear Panel Connections H g f e d cbaá ¡ à ßÞ Ý £¢¤ ¥ » âÚRear Panel Connections Harman kardon Main Remote Control FunctionsForward/Reverse Transport Buttons z Night Mode ` Multi-Room AVRIs shipped from the factory to operate Preset Up/Down When the tuner is Zone II Remote Control Functions Audio Equipment Connections Installation and ConnectionsSystem Installation Connect the analog output of a CD player to the CD inputs ¢Multiroom IR Link System and Power ConnectionsVideo Connection Notes External Audio Decoder Connection External Audio Power Amplifier ConnectionsAC Power Connections Speaker Placement System ConfigurationSpeaker Selection and Placement Using the On-Screen Display System SetupPlug the Power Cable Ý into an unswitched AC outlet Setting the System Configuration MemoriesDelay Settings Input SetupSurround Setup Night Mode Settings Crossover FrequencySystem based on the speaker definitions shown on this To choose between the following settingsSpeaker Setup Be sent to the left and right front channel outputsWay you hear sound in a movie theater or concert hall Output Level AdjustmentCheck the speaker wiring to make Additional Input Adjustments Operation Volume ControlSurround Mode Selection Basic OperationSurround Mode Chart Selecting a Digital Source Digital Status IndicatorsDigital Audio Playback Dolby DigitalNight Mode On the disc to send a full 5.1 feed toTuner Operation Tape RecordingInput Indicators î Memory Backup Output Level Trim AdjustmentNormal output level adjustment for Channel Direct InputTo exit the menu system Advanced FeaturesTurn On Volume Level Display BrightnessTo enter the Advanced Select Menu Figure Semi-OSD SettingsFull-OSD Time Out Adjustment Multiroom Operation Multiroom SetupInstallation On-screen cursor is next to the Multi in lineProgramming the Remote Programming the RemoteMacro Programming Program Indicator light a will flashLearning Codes Into the light under Selector button Will blink onceProgrammed Device Functions Volume Punch-ThroughPress the Volume Up button Reassigning Device Control Selectors Control Selector 34 and the Mute buttonFunction List Setup Code Tables TV Manufacturer/Brand143 154 008 024 030 065 101 143 160038 070 083 015 052 081 160 164101 127 133 143 160 019169 082Setup Code Tables VCR Manufacturer/Brand Setup Code Number020 031 063 054131 133 140 034 067Setup Code Tables CD Setup Code Tables DVDSetup Code Tables SAT Setup Code Tables DVD/LDSetup Code Tables Cable Setup Code Number Remote Control ModelInformation from nonencoded programs Troubleshooting GuideProcessor Reset Lights, motors or other electrical appliancesTechnical Specifications Harman Kardon, Incorporated Part No. J93000502000

AVR 7000 specifications

The Harman-Kardon AVR 7000 is a renowned audio/video receiver that has garnered attention from audiophiles and home theater enthusiasts alike. Launched as part of Harman-Kardon’s prestigious line of receivers, the AVR 7000 is celebrated for its versatility, sound quality, and innovative technologies.

One of the most impressive features of the AVR 7000 is its multi-channel amplification system. It is equipped with a robust 7.1 channel system that delivers a powerful audio experience, suitable for both music and movies. The receiver outputs a substantial 85 watts per channel, ensuring that it can fill even larger rooms with rich, detailed sound. This level of power coupled with Harman-Kardon's expertise in audio technology results in a listening experience that is both immersive and dynamic.

In terms of surround sound capabilities, the AVR 7000 is compatible with various audio formats, including Dolby Digital, DTS, and Harman-Kardon’s proprietary surround processing technologies. These formats enable the receiver to create a three-dimensional soundstage that enhances the overall enjoyment of films and music. The inclusion of digital signal processing ensures that audio playback is optimized for the best possible listening experience.

Connectivity is another strongpoint of the AVR 7000. It features an array of input options, including multiple HDMI ports, component inputs, and digital audio connections. This variety allows users to connect a wide range of devices, from Blu-ray players to gaming consoles, making it a versatile choice for any home entertainment setup. Additionally, the AVR 7000 supports video upscaling, which enhances the resolution of standard-definition content to near high-definition quality.

The receiver is also equipped with a built-in AM/FM tuner, offering listeners access to a wide variety of radio stations, enhancing the options for music playback. The customizable user interface and remote control ensure ease of use, allowing users to navigate through their settings and inputs effortlessly.

Overall, the Harman-Kardon AVR 7000 stands out as an excellent choice for those looking to create a high-quality home theater experience. Its combination of powerful amplification, advanced sound processing, and extensive connectivity options makes it a standout performer in its class.
Top Page Image Contents