Getting Started

▌Step 4 : Playing

You can select the title you want to play in a displayed menu and then immediately start playback.

A DVD consists of sections called titles, and sub sections called chapters.

During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically when you finalise recording on DVD-R / DVD-RW discs in Video mode.

You can make your own chapters on DVD+RWs and edit them using the Chapter Edit menu. The chapter’s length (interval between chapters) varies according to the recording mode.

▌Step 5 : Editing a recorded disc

Editing on discs is easier than conventional video tapes. The DVD Recorder supports many different edit functions, possible only with DVDs. With a simple and easy edit menu, you can operate various edit functions, such as delete, copy, rename, lock, etc., on a recorded title.

Creating a playlist (DVD-RAM/DVD-RW in VR mode) With this DVD Recorder, you can create a new playlist on the same disc and edit it without the change of the original recording.

▌Step 6 :Finalising&PlayingonotherDVDcomponents

To play your DVD on other DVD components, finalising may be necessary. First, finish all editing and recording operations, then finalise the disc.

When using a DVD-RW disc in VR Mode

Although finalising is generally unnecessary when playing the disc on a VR Mode compatible component, a finalised disc should be used for playback.

When using a DVD-RW disc in Video Mode

The disc should be finalised first to enable playback on anything other than this DVD Recorder. No more editing or recording can be made on the disc once it has been finalised.

When using a DVD±R disc

You should finalise the disc to play it on a component other than this DVD Recorder. You cannot edit or record on the disc once it has been finalised.

■ You can finalise automatically using EZ REC MODE. (see page 43)

Unpacking

▌Accessories

Check for the supplied accessories below.

Video/Audio Cable

RF Cable for TV

Remote Control

Batteries for Remote

 

Control (AAA Size)

Instruction Manual

Quick Guide

▌Preparing the Remote Control

Install Batteries in the Remote Control

•Open the battery cover on the back of the remote control.

•Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly.

•Replace the battery cover.

If the remote does not operate properly:

•Check the polarity +/- of the batteries (Dry-Cell)

•Check if the batteries are drained.

•Check if remote sensor is blocked by obstacles.

•Check if there is any fluorescent lighting nearby.

Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

English - 10