Samsung DVD-R155/XEB, DVD-R150/XEN manual Setting up Video Options, Dynamic Compression, TV Aspect

DVD-Recorder				Audio
No Disc
Programme	Digital Output		: PCM	►
Setup	DTS		: Off	►
	Dynamic Compression		Off
	NICAM		On
MOVE	OK	RETURN		EXIT
DVD-Recorder				Audio
No Disc
Programme	Digital Output		: PCM	►
Setup	DTS		: Off	►
	Dynamic Compression : On			►
	NICAM		Off
			On
MOVE	OK	RETURN		EXIT

DVD-Recorder			Video
No Disc
Programme	TV Aspect	: 16:9 Wide	►
Setup	3D Noise Reduction : Off		►
	Video Output	: Component	►
	HDMI/DVI Resolution : 576P		►
	DivX(R) Registration		►
MOVE	OK	RETURN	EXIT

DVD-Recorder				Video
No Disc
Programme
	TV Aspect		4:3 LetterBox
Setup	3D Noise Reduction		4:3 Pan-Scan
	Video Output		16:9 Wide
	HDMI/DVI Resolution : 576P			►
	DivX(R) Registration			►
MOVE	OK	RETURN		EXIT

DVD-Recorder				Video
No Disc
Programme	TV Aspect		: 16:9 Wide	►
Setup	3D Noise Reduction		Off
	Video Output		On
	HDMI/DVI Resolution : 576P			►
	DivX(R) Registration			►
MOVE	OK	RETURN		EXIT

▌Dynamic Compression

This is only active when a Dolby Digital signal is detected.

•Off : You can enjoy the movie with the standard Dynamic Range.

•On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low- level content more intelligible and prevent dramatic passages from getting too loud.

▌NICAM

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.

•Off : Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions.

•On : NICAM mode

Setting up Video Options

You can enjoy high quality image through RGB or Component video connections.

1.With the DVD Recorder in Stop mode/No Disc mode, press the MENU button.

2.Press the ▲▼ buttons to select Setup, then press the OK or ► button.

3.Press the ▲▼ buttons to select Video, then press the OK or ► button. Video setup menu will be displayed.

4.Press the ▲▼ buttons to select desired video option, then press the OK or ► button.

5.Press the ▲▼ buttons to select the desired item, then press the OK or ► button.

▌TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)

•4:3 LetterBox : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen.

Black bars will appear at the top and bottom of the screen.

•4:3 Pan-Scan : Select this for conventional size TV when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

•16:9 Wide : You can view the full 16:9 picture on your widescreen TV.

▌3D Noise Reduction (motion adaptive noise reduction)

•On : Provides a cleaner picture through noise reduction (for recording).

•Off : Normal

System Setup

English - 29