Safety instructions | Siemens 2060isdn specs

8.12.98

I_KAP01.FM5

Gigaset 2060isdn, Inland:

A30853-X210-B101-1-19

Safety instructions

Safety instructions

Warning

For your personal safety and protection, never use the base station or mobile unit in the bathroom or other wet environment. The devices are not spray-proof.

●Corded devices (telephone, fax, intercom ....) with ex- posed metal components may carry unacceptably high voltages for short periods of time, for example during thunderstorms. Do not touch these compo- nents.

●Use only the AC power adapter with number C39280- Z4-C65 as supplied to connect the base station to the mains electricity supply.

●Always follow the safety instructions in the documen- tation for the mobile units and accessories.

Certification for basic access and telephone systems

This telephone system has BAPT/BZT “Federal Office for Post and Telecommunications” (Bundesamt für Post und Telekommunikation) certification. It has been certified in accordance with EU regulation 91/263/EC Telecommuni- cation End User Devices.

No special skills are required for connecting the system to and operating it with the Euro-ISDN network and Euro- ISDN systems in Germany.

This device conforms to the requirements of EU regula- tions and the national amendments of Germany and France.

&The conformance of this device with the above-men- tioned regulations is certified by the CE symbol.

The Gigaset 2060isdn was designed for the Ger- man ISDN network. The manufacturer does not guarantee operability in other countries.

8

Image 8

Siemens 2060isdn manual Safety instructions, Certification for basic access and telephone systems

Contents

Gigaset 2060isdn, Inland Corded terminals can be connected Installation steps for the Gigaset 2060isdn Getting startedGetting started Your corded equipment is now ready for use Overviews OverviewsStandard mobile unit, 2000S Front view Rear view Carry clip Overviews Contents Contents 101 103105 Index 107 Certification for basic access and telephone systems Safety instructionsSafety instructions Installation InstallationContents of package Base station Base station Connecting the base station Your mobile unit is registered and ready for use Initial registrationPress the Register button on the base station Then proceed with the base station Registering at more than one base station and Gigaset 1000CRegister Installation System code Press Installation Saving multiple subscriber numbers ServiceNew entry MSN list Delete MSN Installation Ring allocation Wall-mounting the base stationRing allocation Coll. call Entering/changing collective call Range Tips on where to install the base stationSelecting the location Important information about Euro-ISDN Connection options base stationTypes of connection Point-to-multipoint Point-to-point Features Operating information and error messages Operation with comfort mobile unit Using the menusOperation with comfort mobile unit Resume Example External consultation in external call Menu structure for system settingsExt. consultat’n Example illustrating the menu hierarchy Idle state Basic settings Basic settingsSystem settings t Change sys. code Entering/changing the system code Local op Multicell op Basic settings Setting point-to-multipointSystem settings Configuration Point to MP P phonenumber Basic settings Setting point-to-pointSystem settings Configuration Point to P Basic settings Suppressing phone-number display Activating/deactivating call pickupAnonym. call Anonym. answer Press to activate call pickup Service System settings Device data Press OK if you merely want to check the settingActivating/deactivating automatic line seizure Call waiting STN Basic settings Administrating the list of calls Answering/terminating a call Incoming callsIncoming calls Incoming calls Call pickup Internal users Meaning Incoming calls Call pickup from answering machine Answering a waiting call with another call in progress Incoming calls Tracing a call call intercept/MCID Intercept on Dialing external numbers with the keypad Outgoing callsOutgoing calls Outgoing calls Viewing/dialing from list of calls List of calls t Display entry Outgoing calls Dialing internal numbers Calling an internal userCollective call to all mobile units/devices Terminating an internal call Servicet Anonym. call Outgoing calls Activating Anonymous call for a single call Call in progress Call in progressHolding a call Holding an internal call Internal Temp. tone To reset the dialing function deactivate Temp. tonePress the softkey to reset the dialing function Switching to keypad Call in progress Mute function Switching functions Switching functionsInternal consultation/call transfer External consultation Toggling ResumeToggling between internal and external users Toggling between external users Ending the three-way conference Ending toggle modeThree-party conference Activating external call forwarding Switching functions Parking an external callUnparking an external call Deactivating external call forwarding Ext./direct Ext./busy Ext./timeoutOx OK Activating internal call forwarding Deactivating internal call forwarding Switching functions Activating external automatic callback Deactivating external automatic callback Displaying call charges/call duration Call charges, call durationCall charges, call duration System settings t Duration/units Call durationActivate/deactivate display of call duration Units/charges Activate/deactivate display of charge units Call charges, call duration Locks LocksLock for outgoing calls system lock/emergency phone numbers Lock on Phone No. list New entry Delete phone No System settings Call barring Delete all Delete all lock numbersBlocking unwanted calls Lock int2 Lock on Setting user access rights System settings Device data Access rights Internal user System settings System settingsSetting internal collective call Line System settings Device data Auto. Dtmf System settings Device data Trunk holdSystem settings Device data Dial * and # Enabling/disabling trunk hold Reset Deleted Not changed System settings Reinitializing the base stationRing allocation for point-to-multipoint access Collective call Example External phone num- bers78901234 45678901 78901234 456789001 Enter/change collective call Enter/change group calls Example External phone No Call group 12345678 Example External phone No Call groupRing allocation Select Group diversion Diversion destSet call forwarding with group call Group diversion System settings Unregistering a mobile unit Service Unregister Operation with other mobile units Operation with other mobile unitsGigaset 1000C Gigaset 2000S 1000S Basic settings # 8 *SC* new SC new SC B Call in progress Incoming callsOutgoing calls Switching functions # 4 1 3O MSN Call charges, call duration Locks Operation with door intercom int. No Multicell operation Connecting corded devices Operation with supplementary devicesOperation with supplementary devices Sockets see illustration, Connecting corded devices other than telephones Setting the device typeConnecting telephones Dialing an external number using the keypad General Controlling answering machines/using telephone services Activating anonymous call for a single call Operation with supplementary devices Incoming calls Call pickup/pickup from answering machineSupplementary device is idle Answering call waiting Operation with supplementary devices Switching functions Consultation call/call transfer Starting an internal consultation callTerminating an internal consultation call Call transfer without consultation Gigaset 2060isdn , Inland Toggling with a telephone set to Dtmf dialing Three-party conferenceOr terminate the three-party conference Activating external automatic callback Unparking the external call Deactivating external automatic callbackParking an external connection Examples of how to connect door intercoms via TFE Operation with door intercomsOperation with door intercoms Terminals of the TFE adapter box Recommendation Ring allocation for the door intercom Connection to comfort mobile unit Connection to supplementary device Multicell system Organization of base stations and mobile units Possible combinationsGeneral remarks 150m Registering comfort mobile units at multiple base stations Multicell system Setting multicell operation Setting automatic base station selection Select station Preferred search Enable/disable base station change with call in progress Switching to another base station while conducting a call General remarks Activating PBX features Example setting up a consultation callOr switch the call Operation behind a private branch exchange Examples System settings Device data Transfer callOther Euro-ISDN features Ring signals Acoustic signalsGeneral notes General notes Technical data Wipe the mobile units and base station clean with aGeneral notes System upkeep Electrostatic buildup General notes Troubleshooting Problem Possible cause Remedy General notes Warranty Siemens Service Telephone in GermanyService hours Monday to Friday Am 7 pm Saturday Am 2 pm Contact partners Frequently asked questions Frequently asked questionsCall charge/totals management Suppressing transmission of phone number Selective call enable Anonymous answerCallback on Busy Device type ID Answering machines Music on holdParking call transfer on bus Private branch exchange behind Gigaset 2060isdn Handover Gigaset 2060isdn behind a PBXRoaming Glossary GlossaryAutomatic call back Call forwarding Call waiting Emergency phone number En-bloc dialingEuro-ISDN Extension number System code Three-partyConference Toggle Quick-reference guide, comfort mobile unit Xz x Dial Quick-reference guide, supplementary device Sion to initiate a three-party conference Party’s telephone for this callSeize the line and enter the phone number Park external call Special accessories Special accessoriesGigaset 2000C Gigaset 2000H Special accessories Gigaset 2000T Gigaset 1000TAE Index 109 110 111 BACKPAGE.FM Siemens Aktiengesellschaft