8.12.98

I_KAP03.FM5

Gigaset 2060isdn, Inland:

A30853-X210-B101-1-19

Basic settings

Setting point-to-point

.t Service

tP/P phonenumber

You can use this mode with your Gigaset 2060isdn, but you must obtain the point-to-point access from your net- work provider, who also provides the requisite network terminator.

When configured in this way your Gigaset 2060isdn is compatible only with a point-to-point access installed by your network provider.

The comfort mobile unit is idle. You will be prompted to

Ženter the system code in the course of this procedure (default code: “0000”).

tMeaning: see footnote

 

t

System settings

t

Configuration

t

Point to P.

After confirming - and thus activating - “Point to P.”, select:

Enter the full point-to-point phone number:

oInternational code (e. g. 0044 for UK),

followed by the local code (e.g. 171 for London)

o

oand the phone number you received from your network provider.

Use the

OK

softkey to check the entries and the

 

softkey to save the new entry or change.

SAVE

The phone number cannot be more than 10 dig- its in length.

If you change to point-to-point you must re--ini- tialize the base station by unplugging the AC adapter from the mains socket and then recon- necting to the power supply. For more details on point-to-point operation, page 17 and page 81.

24tmeans: browse with u

Z or u NEXT

and press x

OK to confirm

Page 24
Image 24
Siemens 2060isdn manual Basic settings Setting point-to-point, P phonenumber, System settings Configuration Point to P