Siemens 2060isdn manual Initial registration, Press the Register button on the base station

8.12.98 I_KAP01.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Installation

Registering the Gigaset 2000C comfort mobile unit

A mobile unit has to be ready for operation before you can use it with a base station. See the section entitled “Instal- lation” in the User Guide supplied with your Gigaset 2000C.

Each mobile unit has to be registered at the base station. The registration procedure for the Gigaset 1000C is de- scribed on the next page.

Initial registration

The following prompt is displayed if the mobile unit is not registered at a base station:

x OK x OK o

1… 8

x OK

Register?

OK

((

Press to confirm. Enter the 4-digit system code of the base station and confirm this entry as well (default code: “0000”). The mobile unit searches for the base station waiting to accept registration. The message “Registering with Station 1” appears on the display.

Press the Register button on the base station

Use a pointed instrument (such as a pencil or ball-point pen) to press the button. The Register button starts flash- ing.

Register button

The unassigned internal numbers are listed as soon as the connection between the base station and mobile unit is established.

Key in the internal number you want to assign to the mo- bile unit. Use X to correct your entry if necessary.

Confirm your choice of internal number. This concludes the registration procedure and a message to this effect appears in the display, for example “Unit registered with internal No. 1”.

Your mobile unit is registered and ready for use.

11