Siemens 2060isdn manual Multicell system Setting multicell operation, Service

8.12.98 I_KAP05.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Multicell system

Setting multicell operation

The comfort mobile unit is idle. You will be prompted to

Ženter the system code in the course of this procedure (default code: “0000”).

tMeaning: see footnote

.t Service

tmulticell op

t System settings t Configuration t Point to MP

After selecting and then confirming “Point to MP” and thus activating this setting, select:

For operation with multiple base stations.

The message “internal connec. via S0 bus disabled” ap- pears on the display.

xOK Press this softkey if you want to use the multicell system with trunk access.

or

uENABLE

Press this softkey if you want to use the multicell system behind a private branch exchange.

If your telephone is set for multicell operation, the CHANGE softkey appears automatically in the display when an external call is in progress.

tmeans: browse with u

Z or u NEXT

and press x

OK

to confirm 85