Installation
17
I_KAP01.FM5 Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Connection options: base station
The default operating mode is “point-to-multipoint access”. The procedure for changing the op-
erating mode to “point-to-point” is described on ➔page 24.
Important information about Euro-ISDN
Your ISDN system Gigaset 2060isdn supports two types of access.
Types of connection
●Point-to-multipoint
You can connect and operate one or more devices if you have an access of this type. You
can connect other ISDN devices along with your Gigaset 2060isdn, for example an ISDN-
compatible fax machine or a PC with ISDN card. If you operate a multicell system (➔page
84) you can connect up to 6 Gigaset 2060isdn base stations to a point-to-multipoint access.
You can use a maximum of 10 multiple subscriber numbers on a point-to-multipoint access.
All users assigned an MSN are called via this number. You can also assign all users to one
MSN. The MSNs are individually programmable:
Example: MSN 1 = office MSN 2 = private MSN 3 = fax
●Point-to-point
The Gigaset 2060isdn has to be the only communication system connecting to a point-to-
point access.
Users can be reached selectively by dialing the internal numbers as extension suffixes. Col-
lective calls and group calls are not supported.
This is a particularly economical operating mode if the number of users connected to your
Gigaset2060isdn is large (e.g. 8 mobile units, 1 corded telephone, 1 fax machine).