Siemens 2060isdn manual Installation Ring allocation, Wall-mounting the base station

8.12.98 I_KAP01.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Installation

Ring allocation

.t Service

tMSN n

tRing allocation

tColl. call

Ring allocation is the function which enables you to define the user and MSN at which incoming calls are signalled or to which calls are directed.

The comfort mobile unit is idle. You will be prompted to

Ženter the system code in the course of this procedure (default code: “0000”).

tMeaning: see footnote

t System settings t Line data

Select the multiple subscriber number for which you want to set ring allocation, for example MSN 1.

This is the menu for editing ring allocation. The current setting is marked “active”.The options at your disposal are as follows:

Entering/changing collective call

The collective call list is displayed if you select “Collective call“.

Example:

External phone number	Corresponding internal
	users
12345678	2, 3, 5

When an external call for number 12345678 is incoming, the call is signalled simultaneously to the users having the internal numbers 2, 3 and 5.

Wall-mounting the base station

If you want to have the base station wall-mounted, proceed as follows:

1.Drill two holes (Ø 5mm) one above the other with the centers 120 mm apart.

2.Insert wallplugs of the correct size.

3.Insert the two screws and tighten them until the gap between the wall and the underside of the screw heads is approx. 5 mm.

4.Position the base station with the screw heads projecting into the slots in the rear and press the base station down to engage the screws.

tmeans: browse with u

Z or u NEXT

and press x

OK to confirm 15