Siemens 2060isdn manual Enter/change collective call, Enter/change group calls

8.12.98 I_KAP03.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

System settings

Setting/changing ring allocation for point-to-multipoint access

.t Service

tMSN n

tRing allocation

tColl. call

If you have a point-to-multipoint access, you have to save external phone numbers (multiple subscribe numbers, MSNs, ➔ page 14) before you proceed to ring allocation.

If your configuration incorporates more than 6 cordless users, the phone number is not displayed on the called party’s telephone if the calling party is cordless user 6, 7 or 8 as defined by the order in which the cordless users were registered.

The comfort mobile unit is idle. You will be prompted to

Ženter the system code in the course of this procedure (default code: “0000”).

tMeaning: see footnote

t System settings t Line data

Select the multiple subscriber number for which you want to set ring allocation, for example MSN 1.

This is the menu for setting ring allocation. The current setting is marked “active”.The options at your disposal are as follows:

Enter/change collective call

The collective call list is displayed if you select “collective call”.

tGroup call

Example:

External phone No.	Corresponding internal
	users
12345678	2, 3, 5

When an external call is incoming for MSN 12345678, the users with internal numbers 2, 3 and 5 are called simulta- neously.

Enter/change group calls

The call list of group 1 is displayed, followed by that of group 2, if you select “group call”.

tmeans: browse with u

Z or u NEXT

and press x

OK to confirm 57