Siemens 2060isdn manual Call charges, call duration, Displaying call charges/call duration

8.12.98 I_KAP03.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Call charges, call duration

Call charges, call duration

Displaying call charges/call duration

You can check the total accrued call charges and the charge for the most recent call at each mobile unit. The to- tal accrued charge is the sum of the charges for calls placed from the mobile unit in question. For details on set- ting the call charge factor, ➔ page 47.

You set the parameters for all mobile units and devices at the mobile units, the parameters being for call duration, units and charges. You can also decide whether or not to have the running total for accrued charges or units dis- played before each call commences.

You can also reset the totals per mobile unit or device and the total for all devices with the aid of the mobile units.

Display units

:

External

0000026 00008

Charge factor = 0

Units remain visible for ap- prox. 4 seconds after termi- nation of the call.

Total Last call

Display call charges in currency units

:

Charge factor > 0

Call charges remain visible

21.600.72 for approx. 4 seconds after termination of the call.

Total Last call

Display call duration

If the call timer is activated it starts as soon as the connec- tion is set up.

:

The timer stops when the connection is cleared

00:03:14 down; the call duration re- mains visible for approx. 4 seconds after termination of the call.

Hours

Minutes

Seconds

46