Siemens 2060isdn manual Setting user access rights

8.12.98 I_KAP03.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Locks

The comfort mobile unit is idle.

Ž

.t Service

tEnable ring

tMeaning: see footnote t Sel. call enable

This is the menu for blocking unwanted calls. The options at your disposal are as follows:

Activate/deactivate unwanted call blocking.

All incoming calls are blocked if you do not define a num- ber.

t	Phone No. list	Check/change phone numbers for wanted calls.
t		Add new phone number for wanted calls.
	New entry
t		Delete individual phone number as origin of wanted calls.
	Delete phone No

Deactivating unwanted calls blocking

You do not have to go through the Service menu in order to deactivate unwanted calls blocking.

Press the off-hook key

c

.t Set sys funct. t Sel. call enable

u

OFF

Press this key to deactivate unwanted calls blocking.

Setting user access rights

By defining access rights for each registered mobile unit you determine which internal users can place external, charged calls.

All devices have unrestricted trunk access by default.

1.Unrestricted trunk access (= default)

The device can be used to conduct incoming and outgoing external calls.

2.Incoming-only access

The device can be used only to answer incoming calls. All external dialing options are disabled.

3.Internal-only access

The device can be used only to conduct internal calls. All external dialing options are disabled. You can conduct a consultation call with a user with internal- only authorization, but you cannot transfer the call to this user. You will be recalled if you attempt to do so.

tMeaning: see footnote

tmeans: browse with u

Z or u NEXT

and press x

OK to confirm 51