Siemens 2060isdn manual Switching functions Parking an external call, Unparking an external call

8.12.98 I_KAP03.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19

Switching functions

Parking an external call

You can park a call under a parking code and unpark it again under the same code at another telephone, such as a mobile unit. A call can be parked for up to three minutes. If you park a call you can unpark it only at the same point- to-multipoint access (Glossary, ➔ page 98).

If, for example, your configuration has two base stations operating via a common point-to-multipoint access, you can park an external call at one base station and unpark it at the other, which means that you do not have to break the connection. In this way you can virtually double the range of your mobile unit.

You are conducting an external call and want to continue at another mobile unit.

tMeaning: see footnote

.t Servicet Park

ox

OK

Enter a digit: this is the one-digit parking code which you must also confirm. The call is parked.

The connection is not cleared down: instead, the call is placed on hold.

Unparking an external call

You can unpark a call only at the point-to-multipoint access at which it was originally parked.

The mobile unit at which you want to unpark the call is

Židle.

(

.t Servicet Cancel call park

ox

OK

Enter the original parking code and confirm your entry. The call is unparked and you can resume your conversa- tion.

Activating external call forwarding

You can forward an external call to another external user. You can configure call forwarding for point-to-multi- point or point-to-pointaccess. There are three types of external call forwarding (Glossary, ➔ page 98):

●immediate (direct),

●on busy,

●timeout after no answer (after 5 rings).

The mobile unit is idle. Open the “Forwarding on” menu.

tMeaning: see footnote

.t Servicet Forwarding on

42 tmeans: browse with u Z or u NEXT

and press x

OK to confirm