6electrolux
Residual heat indicator
1Warning: Risk of burns from residual heat. After being switched off, the cook-
ing zones take some time to cool down. Look at the residual heat indicator 
.
Control bar
The heat setting and the power function are set via the control bar. The heat setting indi- cator consists of a chain of light elements.
Operational readiness |
|
indicator for cooking zone | Heat setting indicator |
Power function indicator
Power function
Cooking zone Off | Heat setting selection |
3If the control bar is touched for longer than 6 seconds, a signal sounds and the
appliance switches itself off.
The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated by the residual heat of the cookware.
The cooling fan switches itself on and off depending upon the temperature of the elec- tronics.
Operating the appliance
3Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
| Control panel | Display | |
To switch on | Touch | for 1 second | lights up. The operational readiness |
|
|
| indicators of the individual cooking |
|
|
| zones also light up. |
To switch off | Touch | for 1 second | goes out. The operational readiness |
|
|
| indicators of the individual cooking |
|
|
| zones also go out. |
|
|
|
|
3After switching on, within approx.
10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
